Product Description
Fundamental contents
High-pressure water pump, the most widely used should be the miniature high-pressure water pump. Because it has the characteristics of high pressure, small size, easy to carry, and can be driven by a car battery, it is often used for cleaning, spraying, spraying, and pressurizing.
Characteristics and parameters of high-pressure water pumps
micro water pump, micro high pressure water pump, 24V high pressure water pump
Mini high-pressure water pump (Xinweicheng brand)-self-priming, ultra-high pressure, small size (HSP series)
Model: HSP11050 (Xinweicheng)
Pressure: 11 kg
Flow rate: 7L/Min
Its main features are: 1. Ultra-high pressure (11kg MAX), large flow (7L/MIN), high suction (1m), low noise; stable self-priming function, no need to add “water diversion” first, self The suction speed is extremely fast.
Overpressure, overheating double automatic protection switch, automatic shutdown protection when the output pressure exceeds the maximum pressure; automatic protection when the temperature is too high. Two kinds of interfaces can be connected to soft and hard pipes respectively, equipped with metal joints, which are not easy to damage.
Integrating the advantages of self-priming pumps and chemical pumps, it is synthesized with a variety of corrosion-resistant imported materials, and has the properties of acid resistance, alkali resistance, and corrosion resistance. The pump body is separated from the motor, and the working medium does not contact the motor. There are no mechanical parts in the pump body, and there is no mechanical wear.
It runs smoothly, can be idling, and has an extremely long service life.
exquisite workmanship, small size, light weight, stable performance, easy installation;
Mini high-pressure water pump use
can pump water, liquid (solution), pressurize the water outlet (maximum pressure is up to 11 kg), suitable for liquid spraying, spraying, washing, irrigation, showering, transfer, lifting, cleaning and many other occasions.
Application range of micro high pressure water pump
customers in many fields such as water treatment, liquid sampling, scientific research, instrumentation, chemical analysis, healthcare, medicine and hygiene, bioengineering, automatic control, environmental protection, etc.
Selection guide for miniature water pumps:
1. Large flow requirements (about 4-20 liters/minute), low pressure requirements (about 1-3 kg), mainly used for water circulation, water sampling, lifting, etc., requiring low noise, long life, and high self-priming Process, etc., BSP, CSP, etc. series can be selected;
2. The flow rate is not high (about 1 to 5 liters/minute), but the pressure is relatively high (about 2 to 11 kg), it is mainly used for spraying, pressurizing, car washing, etc. It does not need to work for a long time under high pressure or heavy load. , You can choose ASP, HSP, etc. series;
3. Used for tea table pumping, spraying, etc., the volume is as small as possible, the flow rate is small, and the noise is low (about 0.1 to 3 liters/min), and ASP series are optional.
Fourth, high-temperature working medium (0-100 ºC), need to pump water or gas (may be water-gas mixture or idling, dry running occasions), value volume, noise, continuous use and other performance. The pump needs to run idling and dry for a long time. If there is both water and gas in the pipeline, you need to choose the WKA series of water and gas dual-purpose pumps. The WKA series of miniature water pumps are especially suitable for occasions where water and air are present. For the above applications, WKA series can be selected.
5. There is a large requirement for the flow rate (more than 20 liters/min), but the medium contains a small amount of oil, CHINAMFG particles, residues, etc.
Three series of micro submersible pumps, QZ (medium flow rate 35-45 liters/minute), QD (large flow rate 85-95 liters/minute), QC (super large flow rate 135-145 liters/minute), and DC submersible pumps can be selected Pump.
SERVICE
We have established some overseas agent office to make the after-sales serivce already ,so it can will be service client in fast response .also in our headquarter service team ,there is a expert team which can support client in 7*24 hours .
1. Customer inquiry and consultation (URS documents)
2. Confirmation of treatment plan (DQ documents &PID Drawing)
3.Quotation offer with the technolgy document (Quotation PI )
4.Engineering and Manufacturing (Prodcution &Quality inspection )
5. Product inspection (FAT documents)
6. Delivery arrangement and loading work (full set Shipment documents)
7. After-sales service (OQ,PQ ,SAT documents)
FAQ
1.What about your factory?
Our factory is located in HangZhou city ,ZHangZhoug Province and have more than 15 years experience on machinery making.
2.How will your company control the equipment quality ?
We have a qualified expert team ,we will inspect every production proceed .also Machines will be tested in our plant before shipment .
3.How long the warranty will be?
We provide 1 years warranty for the machine running ,but we will afford whole -life service for the machine .
4.Which kind payment do your company do now ?
We accept Western Union, T/T ,D/P,D/C and irrevocable L/C payable etc.
5.Can we become your distributor in our country?
Yes, we very welcome you! More details will be discussed if you are interested in being our agent.
6.Why we choose “JOSTON “?
1. We enhance the reliability of product’s quality and working life .
2. We decrease the consumption cost of the product in the ruuning.
3. We improve research personnel’s ability to deliver a creative design;
4. We use leading technologies in our product development and innovation, and thereby increase the competitive advantage of products.
7.Do you supply installation equipment in oversea?
Yes, if need, we can send our engineer to your plant to help you do installation and commission.
8.How can we know the order production status ?
We will arrange the person to take photo or video during manufacturing in every week to make you to know the production status.When goods are finished,we will take detailed photos or video for your checking ,after approve ,then we will arrange shipment .also you can arrange FAT in our plant when the goods is ready here
9.what is kind service do you offer before making order ?
1.according to your company URS ,we will make the design drawing accoridingly.
2.after your company approved drawing ,we will make quotation.
3. final we make agreement on payment terms ,delivery time ,package ,shipment etc.
10.how about your company after-sale serivce ?
1. We provide long-term after-sale service.
2. we can do installation and commission for the equipment in your plant if necessary .
3. Meanwhile, you can call or e-mail us to consult on any relevant question since we have a special line for after-sale service. Alternatively, you can communicate on-line with us to solve any problem.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| After-sales Service: | Online Support/Visit Client′s Plant Site |
|---|---|
| Warranty: | 1 Year |
| Max.Head: | Customized |
| Max.Capacity: | Customized |
| Driving Type: | Motor |
| Material: | 304/316L Stainless Steel |
| Customization: |
Available
|
|
|---|
What Is the Impact of Altitude on Vacuum Pump Performance?
The performance of vacuum pumps can be influenced by the altitude at which they are operated. Here’s a detailed explanation:
Altitude refers to the elevation or height above sea level. As the altitude increases, the atmospheric pressure decreases. This decrease in atmospheric pressure can have several effects on the performance of vacuum pumps:
1. Reduced Suction Capacity: Vacuum pumps rely on the pressure differential between the suction side and the discharge side to create a vacuum. At higher altitudes, where the atmospheric pressure is lower, the pressure differential available for the pump to work against is reduced. This can result in a decrease in the suction capacity of the vacuum pump, meaning it may not be able to achieve the same level of vacuum as it would at lower altitudes.
2. Lower Ultimate Vacuum Level: The ultimate vacuum level, which represents the lowest pressure that a vacuum pump can achieve, is also affected by altitude. As the atmospheric pressure decreases with increasing altitude, the ultimate vacuum level that can be attained by a vacuum pump is limited. The pump may struggle to reach the same level of vacuum as it would at sea level or lower altitudes.
3. Pumping Speed: Pumping speed is a measure of how quickly a vacuum pump can remove gases from a system. At higher altitudes, the reduced atmospheric pressure can lead to a decrease in pumping speed. This means that the vacuum pump may take longer to evacuate a chamber or system to the desired vacuum level.
4. Increased Power Consumption: To compensate for the decreased pressure differential and achieve the desired vacuum level, a vacuum pump operating at higher altitudes may require higher power consumption. The pump needs to work harder to overcome the lower atmospheric pressure and maintain the necessary suction capacity. This increased power consumption can impact energy efficiency and operating costs.
5. Efficiency and Performance Variations: Different types of vacuum pumps may exhibit varying degrees of sensitivity to altitude. Oil-sealed rotary vane pumps, for example, may experience more significant performance variations compared to dry pumps or other pump technologies. The design and operating principles of the vacuum pump can influence its ability to maintain performance at higher altitudes.
It’s important to note that vacuum pump manufacturers typically provide specifications and performance curves for their pumps based on standardized conditions, often at or near sea level. When operating a vacuum pump at higher altitudes, it is advisable to consult the manufacturer’s guidelines and consider any altitude-related limitations or adjustments that may be necessary.
In summary, the altitude at which a vacuum pump operates can have an impact on its performance. The reduced atmospheric pressure at higher altitudes can result in decreased suction capacity, lower ultimate vacuum levels, reduced pumping speed, and potentially increased power consumption. Understanding these effects is crucial for selecting and operating vacuum pumps effectively in different altitude environments.
Can Vacuum Pumps Be Used in the Production of Solar Panels?
Yes, vacuum pumps are extensively used in the production of solar panels. Here’s a detailed explanation:
Solar panels, also known as photovoltaic (PV) panels, are devices that convert sunlight into electricity. The manufacturing process of solar panels involves several critical steps, many of which require the use of vacuum pumps. Vacuum technology plays a crucial role in ensuring the efficiency, reliability, and quality of solar panel production. Here are some key areas where vacuum pumps are utilized:
1. Silicon Ingot Production: The first step in solar panel manufacturing is the production of silicon ingots. These ingots are cylindrical blocks of pure crystalline silicon that serve as the raw material for solar cells. Vacuum pumps are used in the Czochralski process, which involves melting polycrystalline silicon in a quartz crucible and then slowly pulling a single crystal ingot from the molten silicon. Vacuum pumps create a controlled environment by removing impurities and preventing contamination during the crystal growth process.
2. Wafering: After the silicon ingots are produced, they undergo wafering, where the ingots are sliced into thin wafers. Vacuum pumps are used in wire saws to create a low-pressure environment that helps to cool and lubricate the cutting wire. The vacuum also assists in removing the silicon debris generated during the slicing process, ensuring clean and precise cuts.
3. Solar Cell Production: Vacuum pumps play a significant role in various stages of solar cell production. Solar cells are the individual units within a solar panel that convert sunlight into electricity. Vacuum pumps are used in the following processes:
– Diffusion: In the diffusion process, dopants such as phosphorus or boron are introduced into the silicon wafer to create the desired electrical properties. Vacuum pumps are utilized in the diffusion furnace to create a controlled atmosphere for the diffusion process and remove any impurities or gases that may affect the quality of the solar cell.
– Deposition: Thin films of materials such as anti-reflective coatings, passivation layers, and electrode materials are deposited onto the silicon wafer. Vacuum pumps are used in various deposition techniques like physical vapor deposition (PVD) or chemical vapor deposition (CVD) to create the necessary vacuum conditions for precise and uniform film deposition.
– Etching: Etching processes are employed to create the desired surface textures on the solar cell, which enhance light trapping and improve efficiency. Vacuum pumps are used in plasma etching or wet etching techniques to remove unwanted material or create specific surface structures on the solar cell.
4. Encapsulation: After the solar cells are produced, they are encapsulated to protect them from environmental factors such as moisture and mechanical stress. Vacuum pumps are used in the encapsulation process to create a vacuum environment, ensuring the removal of air and moisture from the encapsulation materials. This helps to achieve proper bonding and prevents the formation of bubbles or voids, which could degrade the performance and longevity of the solar panel.
5. Testing and Quality Control: Vacuum pumps are also utilized in testing and quality control processes during solar panel production. For example, vacuum systems can be used for leak testing to ensure the integrity of the encapsulation and to detect any potential defects or leaks in the panel assembly. Vacuum-based measurement techniques may also be employed for assessing the electrical characteristics and efficiency of the solar cells or panels.
In summary, vacuum pumps are integral to the production of solar panels. They are used in various stages of the manufacturing process, including silicon ingot production, wafering, solar cell production (diffusion, deposition, and etching), encapsulation, and testing. Vacuum technology enables precise control, contamination prevention, and efficient processing, contributing to the production of high-quality and reliable solar panels.
Can Vacuum Pumps Be Used in the Medical Field?
Yes, vacuum pumps have a wide range of applications in the medical field. Here’s a detailed explanation:
Vacuum pumps play a crucial role in various medical applications, providing suction or creating controlled vacuum environments. Here are some key areas where vacuum pumps are used in the medical field:
1. Negative Pressure Wound Therapy (NPWT):
Vacuum pumps are extensively utilized in negative pressure wound therapy, a technique used to promote wound healing. In NPWT, a vacuum pump creates a controlled low-pressure environment within a wound dressing, facilitating the removal of excess fluid, promoting blood flow, and accelerating the healing process.
2. Surgical Suction:
Vacuum pumps are an integral part of surgical suction systems. They provide the necessary suction force to remove fluids, gases, or debris from the surgical site during procedures. Surgical suction helps maintain a clear field of view for surgeons, enhances tissue visualization, and contributes to a sterile operating environment.
3. Anesthesia:
In anesthesia machines, vacuum pumps are used to create suction for various purposes:
– Airway Suction: Vacuum pumps assist in airway suctioning to clear secretions or obstructions from the patient’s airway during anesthesia or emergency situations.
– Evacuation of Gases: Vacuum pumps aid in removing exhaled gases from the patient’s breathing circuit, ensuring the delivery of fresh gas mixtures and maintaining appropriate anesthesia levels.
4. Laboratory Equipment:
Vacuum pumps are essential components in various medical laboratory equipment:
– Vacuum Ovens: Vacuum pumps are used in vacuum drying ovens, which are utilized for controlled drying or heat treatment of sensitive materials, samples, or laboratory glassware.
– Centrifugal Concentrators: Vacuum pumps are employed in centrifugal concentrators to facilitate the concentration or dehydration of biological samples, such as DNA, proteins, or viruses.
– Freeze Dryers: Vacuum pumps play a vital role in freeze-drying processes, where samples are frozen and then subjected to vacuum conditions to remove water via sublimation, preserving the sample’s structure and integrity.
5. Medical Suction Devices:
Vacuum pumps are utilized in standalone medical suction devices, commonly found in hospitals, clinics, and emergency settings. These devices create suction required for various medical procedures, including:
– Suctioning of Respiratory Secretions: Vacuum pumps assist in removing respiratory secretions or excess fluids from the airways of patients who have difficulty coughing or clearing their airways effectively.
– Thoracic Drainage: Vacuum pumps are used in chest drainage systems to evacuate air or fluid from the pleural cavity, helping in the treatment of conditions such as pneumothorax or pleural effusion.
– Obstetrics and Gynecology: Vacuum pumps are employed in devices used for vacuum-assisted deliveries, such as vacuum extractors, to aid in the safe delivery of babies during childbirth.
6. Blood Collection and Processing:
Vacuum pumps are utilized in blood collection systems and blood processing equipment:
– Blood Collection Tubes: Vacuum pumps are responsible for creating the vacuum inside blood collection tubes, facilitating the collection of blood samples for diagnostic testing.
– Blood Separation and Centrifugation: In blood processing equipment, vacuum pumps assist in the separation of blood components, such as red blood cells, plasma, and platelets, for various medical procedures and treatments.
7. Medical Imaging:
Vacuum pumps are used in certain medical imaging techniques:
– Electron Microscopy: Electron microscopes, including scanning electron microscopes and transmission electron microscopes, require a vacuum environment for high-resolution imaging. Vacuum pumps are employed to maintain the necessary vacuum conditions within the microscope chambers.
These are just a few examples of the wide-ranging applications of vacuum pumps in the medical field. Their ability to create suction and controlled vacuum environments makes them indispensable in medical procedures, wound healing, laboratory processes, anesthesia, and various other medical applications.
editor by Dream 2024-05-07
China supplier 5.5kw Oil Free IP54 Three Phase Electric Motor Ce Ring Air Blower Vacuum Pump vacuum pump ac system
Product Description
5.5kw Oil Free IP54 Three Phase Electric Motor Ring Blower vacuum pump
| Model | Stage/Phase | Frequency | Power | Voltage | Current | Airflow | Vacuum | Pressure | Noise | weight |
| Hz | KW | V | A | m3/h | mbar | mbar | db | KG | ||
| 2JM 810 H27 | Single/Three | 50 | 7.5 | 345-415△/600-720Y | 16.7△/9.6Y | 530 | -320 | 430 | 70 | 66 |
| 60 | 8.6 | 380-480△/660-720Y | 17.3△/10.0Y | 620 | -350 | 400 | 74 |
Other main product At 50Hz ( voltage can customize )
Application:
- Agriculture(Fish pond and aeration tanks)
- Beverage(bottle drying)
- Bio fuels/bio-gas system
- Food and vegetable processing
- Medical and Health service(Dental cart and dental vacuum)
- Package (Air knives blown-off / Labeling/Drying)
- Plastics/Rubber(Air knives blown-off/ Bottle blow moulding/ Extruder Degassing/Pneumatic conveying/ Thermoforming)
- Printing
- Paper and pulp/ paper converting
- Textile industry
- Transportation/Loading/Unloading(Pneumatic conveying/material handling)
- Water treatment/sewage treatment
- Woodworking(CNC Routing/bulk handling
Air Blowers Export Service:
18 months warranty
Professional engineer will help to recommend the most suitable models
after studying customers’ requirements,
OEM service available.
24 hours service online,you can touch us by email, , ,
7 days delivery time and safe shipment
Contact
| Material: | Aluminum |
|---|---|
| Usage: | Aeration |
| Flow Direction: | Centrifugal |
| Pressure: | High Pressure |
| Certification: | CE, CCC |
| Power: | 7.5kw |
| Customization: |
Available
|
|
|---|
Can Vacuum Pumps Be Used in the Aerospace Sector?
Vacuum pumps indeed have various applications in the aerospace sector. Here’s a detailed explanation:
Vacuum pumps play a crucial role in several areas of the aerospace industry, supporting various processes and systems. Some of the key applications of vacuum pumps in the aerospace sector include:
1. Space Simulation Chambers: Vacuum pumps are used in space simulation chambers to replicate the low-pressure conditions experienced in outer space. These chambers are utilized for testing and validating the performance and functionality of aerospace components and systems under simulated space conditions. Vacuum pumps create and maintain the necessary vacuum environment within these chambers, allowing engineers and scientists to evaluate the behavior and response of aerospace equipment in space-like conditions.
2. Propellant Management: In space propulsion systems, vacuum pumps are employed for propellant management. They help in the transfer, circulation, and pressurization of propellants, such as liquid rocket fuels or cryogenic fluids, in both launch vehicles and spacecraft. Vacuum pumps assist in creating the required pressure differentials for propellant flow and control, ensuring efficient and reliable operation of propulsion systems.
3. Environmental Control Systems: Vacuum pumps are utilized in the environmental control systems of aircraft and spacecraft. These systems are responsible for maintaining the desired atmospheric conditions, including temperature, humidity, and cabin pressure, to ensure the comfort, safety, and well-being of crew members and passengers. Vacuum pumps are used to regulate and control the cabin pressure, facilitating the circulation of fresh air and maintaining the desired air quality within the aircraft or spacecraft.
4. Satellite Technology: Vacuum pumps find numerous applications in satellite technology. They are used in the fabrication and testing of satellite components, such as sensors, detectors, and electronic devices. Vacuum pumps help create the necessary vacuum conditions for thin film deposition, surface treatment, and testing processes, ensuring the performance and reliability of satellite equipment. Additionally, vacuum pumps are employed in satellite propulsion systems to manage propellants and provide thrust for orbital maneuvers.
5. Avionics and Instrumentation: Vacuum pumps are involved in the production and testing of avionics and instrumentation systems used in aerospace applications. They facilitate processes such as thin film deposition, vacuum encapsulation, and vacuum drying, ensuring the integrity and functionality of electronic components and circuitry. Vacuum pumps are also utilized in vacuum leak testing, where they help create a vacuum environment to detect and locate any leaks in aerospace systems and components.
6. High Altitude Testing: Vacuum pumps are used in high altitude testing facilities to simulate the low-pressure conditions encountered at high altitudes. These testing facilities are employed for evaluating the performance and functionality of aerospace equipment, such as engines, materials, and structures, under simulated high altitude conditions. Vacuum pumps create and control the required low-pressure environment, allowing engineers and researchers to assess the behavior and response of aerospace systems in high altitude scenarios.
7. Rocket Engine Testing: Vacuum pumps are crucial in rocket engine testing facilities. They are utilized to evacuate and maintain the vacuum conditions in engine test chambers or nozzles during rocket engine testing. By creating a vacuum environment, these pumps simulate the conditions experienced by rocket engines in the vacuum of space, enabling accurate testing and evaluation of engine performance, thrust levels, and efficiency.
It’s important to note that aerospace applications often require specialized vacuum pumps capable of meeting stringent requirements, such as high reliability, low outgassing, compatibility with propellants or cryogenic fluids, and resistance to extreme temperatures and pressures.
In summary, vacuum pumps are extensively used in the aerospace sector for a wide range of applications, including space simulation chambers, propellant management, environmental control systems, satellite technology, avionics and instrumentation, high altitude testing, and rocket engine testing. They contribute to the development, testing, and operation of aerospace equipment, ensuring optimal performance, reliability, and safety.
Can Vacuum Pumps Be Used for Leak Detection?
Yes, vacuum pumps can be used for leak detection purposes. Here’s a detailed explanation:
Leak detection is a critical task in various industries, including manufacturing, automotive, aerospace, and HVAC. It involves identifying and locating leaks in a system or component that may result in the loss of fluids, gases, or pressure. Vacuum pumps can play a significant role in leak detection processes by creating a low-pressure environment and facilitating the detection of leaks through various methods.
Here are some ways in which vacuum pumps can be used for leak detection:
1. Vacuum Decay Method: The vacuum decay method is a common technique used for leak detection. It involves creating a vacuum in a sealed system or component using a vacuum pump and monitoring the pressure change over time. If there is a leak present, the pressure will gradually increase due to the ingress of air or gas. By measuring the rate of pressure rise, the location and size of the leak can be estimated. Vacuum pumps are used to evacuate the system and establish the initial vacuum required for the test.
2. Bubble Testing: Bubble testing is a simple and visual method for detecting leaks. In this method, the component or system being tested is pressurized with a gas, and then immersed in a liquid, typically soapy water. If there is a leak, the gas escaping from the component will form bubbles in the liquid, indicating the presence and location of the leak. Vacuum pumps can be used to create a pressure differential that forces gas out of the leak, making it easier to detect the bubbles.
3. Helium Leak Detection: Helium leak detection is a highly sensitive method used to locate extremely small leaks. Helium, being a small atom, can easily penetrate small openings and leaks. In this method, the system or component is pressurized with helium gas, and a vacuum pump is used to evacuate the surrounding area. A helium leak detector is then used to sniff or scan the area for the presence of helium, indicating the location of the leak. Vacuum pumps are essential for creating the low-pressure environment required for this method and ensuring accurate detection.
4. Pressure Change Testing: Vacuum pumps can also be used in pressure change testing for leak detection. This method involves pressurizing a system or component and then isolating it from the pressure source. The pressure is monitored over time, and any significant pressure drop indicates the presence of a leak. Vacuum pumps can be used to evacuate the system after pressurization, returning it to atmospheric pressure for comparison or retesting.
5. Mass Spectrometer Leak Detection: Mass spectrometer leak detection is a highly sensitive and precise method used to identify and quantify leaks. It involves introducing a tracer gas, usually helium, into the system or component being tested. A vacuum pump is used to evacuate the surrounding area, and a mass spectrometer is employed to analyze the gas samples for the presence of the tracer gas. This method allows for accurate detection and quantification of leaks down to very low levels. Vacuum pumps are crucial for creating the necessary vacuum conditions and ensuring reliable results.
In summary, vacuum pumps can be effectively used for leak detection purposes. They facilitate various leak detection methods such as vacuum decay, bubble testing, helium leak detection, pressure change testing, and mass spectrometer leak detection. Vacuum pumps create the required low-pressure environment, assist in evacuating the system or component being tested, and enable accurate and reliable leak detection. The choice of vacuum pump depends on the specific requirements of the leak detection method and the sensitivity needed for the application.
What Are the Primary Applications of Vacuum Pumps?
Vacuum pumps have a wide range of applications across various industries. Here’s a detailed explanation:
1. Industrial Processes:
Vacuum pumps play a vital role in numerous industrial processes, including:
– Vacuum Distillation: Vacuum pumps are used in distillation processes to lower the boiling points of substances, enabling separation and purification of various chemicals and compounds.
– Vacuum Drying: Vacuum pumps aid in drying processes by creating a low-pressure environment, which accelerates moisture removal from materials without excessive heat.
– Vacuum Packaging: Vacuum pumps are used in the food industry to remove air from packaging containers, prolonging the shelf life of perishable goods by reducing oxygen exposure.
– Vacuum Filtration: Filtration processes can benefit from vacuum pumps to enhance filtration rates by applying suction, facilitating faster separation of solids and liquids.
2. Laboratory and Research:
Vacuum pumps are extensively used in laboratories and research facilities for various applications:
– Vacuum Chambers: Vacuum pumps create controlled low-pressure environments within chambers for conducting experiments, testing materials, or simulating specific conditions.
– Mass Spectrometry: Mass spectrometers often utilize vacuum pumps to create the necessary vacuum conditions for ionization and analysis of samples.
– Freeze Drying: Vacuum pumps enable freeze-drying processes, where samples are frozen and then subjected to a vacuum, allowing the frozen water to sublimate directly from solid to vapor state.
– Electron Microscopy: Vacuum pumps are essential for electron microscopy techniques, providing the necessary vacuum environment for high-resolution imaging of samples.
3. Semiconductor and Electronics Industries:
High vacuum pumps are critical in the semiconductor and electronics industries for manufacturing and testing processes:
– Semiconductor Fabrication: Vacuum pumps are used in various stages of chip manufacturing, including deposition, etching, and ion implantation processes.
– Thin Film Deposition: Vacuum pumps create the required vacuum conditions for depositing thin films of materials onto substrates, as done in the production of solar panels, optical coatings, and electronic components.
– Leak Detection: Vacuum pumps are utilized in leak testing applications to detect and locate leaks in electronic components, systems, or pipelines.
4. Medical and Healthcare:
Vacuum pumps have several applications in the medical and healthcare sectors:
– Vacuum Assisted Wound Closure: Vacuum pumps are used in negative pressure wound therapy (NPWT), where they create a controlled vacuum environment to promote wound healing and removal of excess fluids.
– Laboratory Equipment: Vacuum pumps are essential in medical and scientific equipment such as vacuum ovens, freeze dryers, and centrifugal concentrators.
– Anesthesia and Medical Suction: Vacuum pumps are utilized in anesthesia machines and medical suction devices to create suction and remove fluids or gases from the patient’s body.
5. HVAC and Refrigeration:
Vacuum pumps are employed in the HVAC (Heating, Ventilation, and Air Conditioning) and refrigeration industries:
– Refrigeration and Air Conditioning Systems: Vacuum pumps are used during system installation, maintenance, and repair to evacuate moisture and air from refrigeration and air conditioning systems, ensuring efficient operation.
– Vacuum Insulation Panels: Vacuum pumps are utilized in the manufacturing of vacuum insulation panels, which offer superior insulation properties for buildings and appliances.
6. Power Generation:
Vacuum pumps play a role in power generation applications:
– Steam Condenser Systems: Vacuum pumps are used in power plants to remove non-condensable gases from steam condenser systems, improving thermal efficiency.
– Gas Capture: Vacuum pumps are utilized to capture and remove gases, such as hydrogen or helium, in nuclear power plants, research reactors, or particle accelerators.
These are just a few examples of the primary applications of vacuum pumps. The versatility and wide range of vacuum pump types make them essential in numerous industries, contributing to various manufacturing processes, research endeavors, and technological advancements.
editor by CX 2023-11-20
China 12V DC Brushless Motor Mini Gas Pump Lab Sampling Portable Small Electric Diaphragm Air Pump Micro Vacuum Pump with Best Sales
Guarantee: 1 a long time
Personalized help: OEM, ODM, OBM, Application reengineering
Model Variety: AD3BL12
Software: Automotive Market, Biofuel Sector, Industrial Buildings, District Strength, Household Houses, Good Price Gearbox MLGU MLC GEARBOX Transmission 4TH Synchronizer assembly spring For Fiat Ducato Peugeot Boxer Foodstuff and Beverage Market, CZPT OEM, Industrial Boilers, Industrial Utilities, Irrigation and Agriculture, Machining, Marine, Metallic and Tools Manufacturers, Tailored wtf itf taekwondo hand gear taekwondo gloves protector taekwondo hand guard Pharmaceutical business, temperature manage
Horsepower: 2-3L/Min
Electricity Resource: Electric powered
Strain: Low Pressure
Composition: Diaphragm Pump
Cable Length: 15CM
Voltage: 12VDC
Electrical power: 1.6W
motor: DC Brushless Motor
Solution name: DC Brushless Motor Little Diaphragm Pump
Brand: Fluidsmart
Max. Adverse Pressure: -55KPa
Max. Positive Strain:: +90KPa
Dimension: 38.8*24.5*43.3mm
Colour: Black /Silver
Pump Content: PPS
Diaphragm/Valve: EPDM
Fat: 56.2g
Packaging Specifics: with common carton box or tailored.
Port: ZheJiang
Goods Description AD3BL12V Brushless Air Warmth Pump Attributes Optimized pump body to guarantee modest volume, supply largeflow and sustain reasonably low energy consumption.The fuel flow is stable and the motor operates in a vast range. * High efficiency * Minimal leakage charge and air pollution-free of charge sample fuel * Lengthy lifetime>8000hours
| Model: | AD3BL12 | AD3BL24 |
| Voltage selection: | 12Vdc | 24Vdc |
| Maximum flow: | 2-3L/min | 2-3L/min |
| Motor kind: | Dc brushless motor | Dc brushless motor |
| Waterproof quality: | IP00/IP50 customized | IP00/IP50 personalized |
| Storage environment temp.: | -40℃~60℃ | -40℃~60℃ |
| Working atmosphere temp.: | -20℃~50℃ | -20℃~50℃ |
| Purple wire link: | positive pole | positive pole |
| Black wire connection: | negative pole | negative pole |
Basic knowledge of vacuum pump
A vacuum pump is used to create a relative vacuum within a sealed volume. These pumps take gas molecules out of the sealed volume and expel them, leaving a partial vacuum. They can be used in a variety of applications, including medicine and laboratory research. This article will cover the basics of vacuum pumps, including how they operate and the materials they use. You will also learn about typical applications and fees.
How it works
A vacuum pump is a pump that removes air from a specific space. These pumps are divided into three types according to their function. Positive displacement pumps are used in the low vacuum range and high vacuum pumps are used in the ultra-high vacuum range. The performance of a vacuum pump depends on the quality of the vacuum it produces.
A vacuum pump creates a partial vacuum above the surrounding atmospheric pressure. The speed of the pump is proportional to the pressure difference between the ambient atmosphere and the base pressure of the pump. Choose a base pressure for a specific process, not the lowest possible pressure in the system.
A scroll pump is also a type of vacuum pump. This type of pump consists of two scrolls, the inner scroll running around the gas volume. It then compresses the gas in a spiral fashion until it reaches the maximum pressure at its center. The inner and outer scrolls are separated by a polymer tip seal that provides an axial seal between them. Its pumping speed ranges from 5.0 to 46 m3/h.
Another type of vacuum pump is the screw pump, which uses two rotating screws in one chamber. The screw in the screw pump is a left-handed screw, and the other is a right-handed screw. The two screws do not touch each other when engaged, preventing contamination of the medium. They also feature high pumping speeds, low operating costs and low maintenance requirements.
The vacuum pump consists of several parts such as rotor and base. These components create an area of low pressure. Gas and water molecules rush into this low pressure area, where they are sucked into the pump. The pump also rotates, preventing fluid leakage to the low pressure side.
The main function of a vacuum pump is to remove gas particles from an enclosed space. It does this by changing gas molecules between high and low pressure states. A vacuum pump can also generate a partial vacuum. There are several types of vacuum pumps, each designed to perform a specific function, so it is important to choose the right type for your application.
Vacuum Pump Materials
There are two main materials used in vacuum pumps: metal and polyethylene. Metal is more durable, while polyethylene is cheaper and more flexible. However, these materials are not suitable for high pressure and may cause damage. Therefore, if you want to design a high-pressure pump, it is best to use metal materials.
Vacuum pumps are required in a variety of industrial environments and manufacturing processes. The most common vacuum pump is a positive displacement vacuum pump, which transports a gas load from the inlet to the outlet. The main disadvantage of this pump is that it can only generate a partial vacuum; higher vacuums must be achieved through other techniques.
Materials used in vacuum pumps vary from high to rough vacuum pumps. Low pressure ranges are typically below 1 x 10-3 mbar, but high vacuum pumps are used for extreme vacuum. They also differ in manufacturing tolerances, seals used, materials used and operating conditions.
The choice of vacuum pump material depends on the process. The vacuum range and ultimate pressure of the system must be carefully analyzed to find the right material for the job. Depending on the purpose of the pump, a variety of materials can be used, from ceramic to plastic substrates. When choosing a vacuum pump material, be sure to consider its durability and corrosion resistance.
Dry and wet vacuum pumps use oil to lubricate internal parts. This prevents wear of the pump due to corrosion. These types of pumps are also recommended for continuous use and are ideal for applications where the gas is acidic or corrosive. Therefore, they are widely used in the chemical and food industries. They are also used in rotary evaporation and volatile compound processing.
Positive displacement pumps are the most common type. They work by letting gas flow into a cavity and venting it into the atmosphere. Additionally, momentum transfer pumps, also known as molecular pumps, use high-velocity jets of high-density fluids to transport air and gases. These pumps are also used for medical purposes. 
Typical application
Vacuum pumps are used to remove large amounts of air and water from the process. They are used in various industries to improve performance. For example, liquid ring vacuum pumps are used in packaging production to produce plastic sheets in the desired shape and size. Large-capacity suction pumps are used in the chemical industry to improve the surface properties of materials and speed up filtration.
There are two basic principles of vacuum pumps: entrapment and gas transfer. Positive displacement pumps are suitable for low to medium vacuums, while momentum transfer and retention pumps are suitable for high vacuums. Typically, high vacuum systems use two or more pumps working in series.
There are three main categories of vacuum pumps: primary, booster, and secondary. Their working pressure ranges from a few millimeters above atmospheric pressure. They also have several different technologies, including positive displacement, gas transfer, and gas capture. These pumps transport gas molecules through momentum exchange. Typically, they release gas molecules at roughly the same rate as they entered. When the process is complete, the gas molecules are slightly above atmospheric pressure. The discharge pressure is equal to the lowest pressure achieved, which is the compression ratio.
Vacuum pumps are widely used in all walks of life. They can be found in almost every industrial sector, including food processing. For example, they are used to make sausages and food products. In addition, they are used in landfill and digester compressors. They can also be used to build solar panels.
Oil lubricated vacuum pumps are currently the most energy-efficient vacuum pumps. These pumps are suitable for a variety of industrial applications including freeze drying and process engineering. These pumps use oil as a sealant and coolant, which makes them ideal for a variety of applications. These pumps are also very sensitive to vibration.
Another type of vacuum pump is a turbomolecular pump. These pumps have multiple stages and angled vanes. Unlike mechanical pumps, turbomolecular pumps sweep out larger areas at higher pumping speeds. In addition, they can generate ultra-high oil-free vacuums. Additionally, they have no moving parts, which makes them ideal for high vacuum pressures. 
Vacuum Pump Cost
Annual maintenance costs for vacuum pumps range from $242 to $337. The energy consumption of the vacuum pump is also a consideration, as it consumes electricity throughout its operating cycle. For example, an electric motor for a 1 hp pump uses 0.55 kW/hr, which equates to 2,200 kWh of energy per year.
Energy cost is the largest part of the total cost of a vacuum pump. They are usually four to five times higher than the initial purchase price. Therefore, choosing a more energy efficient system can reduce the total cost of ownership and extend the payback period. For many clients, this can be millions of dollars.
A vacuum pump works by compressing gas as it enters a chamber. This pushes the gas molecules towards the exhaust. The exhaust gas is then vented to the atmosphere. A special spring-loaded vane seals the pump’s chamber, creating an airtight seal. Specially formulated oils are also used to lubricate, cool and seal rotors.
Vacuum pumps are not cheap, but they have many advantages over water suction. One of the main advantages of vacuum pumps is their flexibility and reliability. This is an industry-proven solution that has been around for years. However, the initial cost of a vacuum pump is higher than that of a water aspirator.
If the vacuum pump fails unexpectedly, replacement costs can be high. Proper maintenance can extend the life of your system and prevent unplanned downtime. However, no one can predict when a pump will fail, and if a pump does fail, the cost can far exceed the cost of buying a new pump. Therefore, investing in preventive maintenance is a wise investment.
There are many types of vacuum pumps, not all of which are suitable for the same type of application. Make sure to choose a pump with the power required for the job. It should also be able to handle a variety of samples.
editor by CX 2023-07-04
China best Sk 2sk 2BV China Electric Pumps Liquid Water Ring Vacuum Pump for Milking Machine or Plastic Extrusion Line with CZPT Motor vacuum pump brakes
Product Description
Summarize:
Models 2BV and SK are CZPT liquid ring vacuum pumps.
Model 2SK is double stages liquid ring vacuum pump.
The liquid-ring vacuum pump compresses gas by rotating a vaned impeller within a cylindrical casing. Liquid (usually water) is fed into the pump, and by centrifugal acceleration, forms a moving cylindrical ring against the inside of the casing. This liquid ring creates a series of seals in the space between the impeller vanes, which form compression chambers. The eccentricity between the impeller’s axis of rotation and the casing geometric axis results in a cyclic variation of the volume enclosed by the vanes and the ring.
Gas, often air, is drawn into the pump through an inlet port in the end of the casing. The gas is trapped in the compression chambers formed by the impeller vanes and the liquid ring. The reduction in volume caused by the impeller rotation compresses the gas, which reports to the discharge port in the end of the casing.
Compressed gas on discharge of pump contains certain amount of working liquid which is usually removed in vapor-liquid separator.
Application:
Single stage or 2 stage liquid ring vacuum pumps are the ideal for specific, humid, dirty or high capacity applications in heavy industries,a selection of which can be found below.
The 2BV, SK and 2SK series are the workhorses: proven, strong and reliable machines that deliver utility or process vacuum.
2BV SK and 2SK series pumps are therefore suitable for use in the following industry:
· General manufacturing · Metalwork industry
· Food processing · Petroleum industry
· Paint industry· Mining
· Chemical industry· Oil and gas
· Paper and allied products · Plastics
· Brick extrusion· Textile industry
· Automotive industry· Power and utilities
· Cement and allied products
Performance data:
| Model | Size | Ultimate vacuum | Maximum air flow | Motor | Speed | Water consumption | Pump diameter |
| kpa | M3/min | KW | Rpm | L/min | mm | ||
| 2BV | 2060 | 3.3 | 0.45 | 1.1 | 2880 | 2 | 25 |
| 2061 | 0.87 | 1.5 | 2880 | 2 | 25 | ||
| 2070 | 1.33 | 3 | 2880 | 2.5 | 40 | ||
| 2071 | 1.83 | 4 | 2880 | 4.2 | 40 | ||
| 5110 | 2.75 | 4 | 1450 | 7 | 50 | ||
| 5111 | 3.83 | 5.5 | 1450 | 8.5 | 50 | ||
| 5121 | 4.68 | 7.5 | 1450 | 10 | 65 | ||
| 5131 | 6.68 | 11 | 1450 | 15 | 65 | ||
| 5161 | 8.3 | 15 | 970 | 20 | 80 | ||
| SK | 1.5 | 8.3 | 1.5 | 4 | 1440 | 15 | 70 |
| 3 | 3 | 5.5 | 1440 | 20 | 70 | ||
| 6 | 6 | 11 | 1440 | 30 | 80 | ||
| 9 | 9 | 15 | 970 | 50 | 80 | ||
| 12 | 12 | 18.5 | 970 | 50 | 80 | ||
| 15 | 15 | 30 | 730 | 60 | 150 | ||
| 20 | 20 | 37 | 730 | 60 | 150 | ||
| 30 | 30 | 55 | 730 | 100 | 150 | ||
| 42 | 42 | 75 | 730 | 130 | 150 | ||
| 2SK | 1.5 | 3.3 | 1.5 | 7.5 | 1440 | 15 | 40 |
| 3 | 3 | 7.5 | 1440 | 20 | 40 | ||
| 6 | 6 | 15 | 1440 | 30 | 70 | ||
| 9 | 9 | 18.5 | 970 | 50 | 100 |
Who we are:
We are a professional liquid ring vacuum pump manufacturers in China. We can provide the best electric liquid ring vacuum pump for sales and competitive price. If you are looking for double stage liquid ring vacuum pump supplier, we are a good choice. Contact us to get the price of stainless steel liquid ring vacuum pump, double stage liquid ring vacuum pump, etc..
| 2BV 2 stage water ring vacuum pump |
SK CZPT liquid ring vacuum pump |
2SK 2 stage liquid ring vacuum pump |
2BE double stage liquid ring vacuum pump |
Company information:
ZHangZhoug CZPT Technology Co., Ltd is 1 of the leading manufacturers and exporters in the field of industry pumps with manufacturing facilities in mainland China. We are specialized in oil pump, diaphragm pump, diesel engine pump, centrifugal pump, screw pump, chemical pump etc.
|
Shipping Cost:
Estimated freight per unit. |
To be negotiated |
|---|
| Oil or Not: | Oil |
|---|---|
| Structure: | Rotary Vacuum Pump |
| Vacuum Degree: | Vacuum |
| Samples: |
US$ 2500/Set
1 Set(Min.Order) | Order Sample |
|---|
| Customization: |
Available
|
|
|---|
How to install a vacuum pump
A vacuum pump creates a relative vacuum within a sealed volume by drawing gas molecules from the sealed volume. Vacuum pumps can be used in a variety of industrial applications. They also offer various lubrication options. If you are considering purchasing, please understand its functions and features before purchasing.
How it works
The working principle of a vacuum pump is called gas transfer. The principle can be further divided into two basic categories: positive displacement and momentum transfer. At high pressure and moderate vacuum, gas molecules collide and move and create a viscous flow. At higher vacuum levels, gas molecules separate to create molecular or transitional flows.
Another principle of vacuum pumps is fluid-tightness. There are two main types of seals: rotary seals and screw seals. Rotary seals prevent liquid leakage, while screw seals only allow liquids to flow out at higher pressures. Some pumps may not use the third seal.
The flow rate of the vacuum pump determines the machine’s ability to pump a certain amount of material. A higher pumping speed will shorten the drain time. Therefore, the mass flow of the vacuum pump must be carefully considered. The speed and type of vacuum must also be considered.
The working principle of a vacuum pump is to push gas molecules from a high-pressure state to a low-pressure state. This creates a partial vacuum. There are many different types of vacuum pumps, each with different functions. Some are mechanical, some are chemical. In either case, their function is the same: to create a partial or complete vacuum. Vacuum pumps use a variety of technologies and are sized according to the application. Proper sizing is critical for optimum efficiency.
Gas transfer pumps use the same principles as vacuum pumps but use different technology. One of the earliest examples is the Archimedes spiral. Its structure consists of a single screw inside a hollow cylinder. More modern designs use double or triple screws. The rotation of the screw causes gas molecules to be trapped in the cavity between the screw and the housing. The fluid is then discharged at slightly above atmospheric pressure. This difference is called the compression ratio.
Another type of vacuum pump is a diffusion pump. Its main use is industrial vacuum processing. It is used in applications such as mass spectrometry, nanotechnology and analytical instrumentation. These pumps are generally inexpensive to purchase and operate.
Apply
Vacuum pumps are essential for many scientific and industrial processes. They are used in the production of vacuum tubes, CRTs, lamps and semiconductor processing. They can also be used to support mechanical equipment. For example, they can be mounted on the engine of a motor vehicle. Likewise, they can be used to power hydraulic components of aircraft. Among other uses, the vacuum pump helps calibrate the gyroscope.
Vacuum pumps are widely used in the pharmaceutical industry and are one of the largest users of this technology. They help deal with hazardous materials and eliminate waste quickly. They are also used in power jets, dump fuel tanks and rear doors, among others. However, they are sensitive to contamination and should only be used in environments where leaks can be prevented. Therefore, choosing the right fluid for the application is very important.
The most popular type of vacuum pump is the rotary vane pump. These pumps are known for their high pumping speed and low pressure. Their efficient pumping capacity allows them to reach pressures below 10-6 bar. Additionally, they are usually oil-sealed and have excellent vacuuming capabilities.
Vacuum pumps are often used to remove air from closed systems. They create a vacuum by reducing the density of the air in the compressed space. This is done by using the mechanical force energy generated by the rotating shaft. When the pump is under pressure, it converts this energy into pneumatic power. When the pressure is different, the energy produced depends on the volume of the gas and the pressure difference between the inner and outer atmospheres.
Vacuum pumps are also used in the manufacture of solar cells. They are used in the manufacture of solar cells, including ingot casting processes as well as cell and module processes. The design of the vacuum system plays an important role in reducing the cost of the process, thus making it profitable. Due to their low maintenance costs, they are an invaluable tool for making solar cells.
Vacuum pumps are widely used in many applications. In addition to industrial and research uses, they are also used in water remediation. 
Oil Lubrication Option
Vacuum pumps are available in a variety of oil lubrication options. Choosing the right lubricant can help protect your vacuum pump and maximize its performance. Different base oils may contain different additives, such as antioxidants, and some contain additional additives for specific purposes. You should choose an oil with the right concentration of these additives for optimal lubrication of your vacuum pump.
Vacuum pumps are usually lubricated with paraffinic mineral oil. However, this type of lubricant evaporates as the temperature increases. To minimize evaporative losses, choose a lubricant with low vapor pressure. Also, you should choose lubricants that are resistant to extreme temperatures. Extreme temperatures can put extra stress on the oil and can even significantly shorten the life of the oil.
In terms of viscosity, synthetic oils are the best choice for vacuum pumps. These types of oils are designed to resist gas dissolution and are more resistant to corrosion. Therefore, synthetic oils are ideal for handling aggressive substances. Whether or not your pump needs lubrication, choosing a quality product is important.
The vacuum pump oil should be changed periodically according to the manufacturer’s recommendations. If you use a filter, you should also change the oil as soon as the filter reaches the end of its life. Unplanned oil changes will eventually cause the vacuum pump to not reach its maximum vacuum capacity.
You can buy vacuum pump oil from vacuum pump manufacturers or other suppliers. These options are available in a variety of sizes, and labels can be customized. The oil should be designed for the pump. However, you should check the manufacturer’s recommendations to avoid buying the wrong type.
If you choose to use a synthetic oil, it is important to use a good quality oil. It helps the pump work more efficiently and prolong its life. 
Install
After choosing a suitable location, the next step is to install the pump. First, place the pump on a flat surface. Then, screw the pump onto the motor body above the check valve. Make sure the accessories are wrapped with sealing tape and secured with screws. The direction of gas inflow and outflow is indicated by arrows on the pump. The direction of rotation around the pump is also shown.
During commissioning, check the operation of each part of the pump. If the pump is equipped with a pipe connection, the pipe should be the same size and shape as the pump flange. Also, make sure that the piping does not cause any pressure drop. In addition, the first three weeks of operation require the installation of protective nets at the suction ports.
When selecting a pump, consider the back pressure of the system. Too much back pressure will affect the capacity of the vacuum pump. Also, check the temperature of the seal. If the temperature is too high, the seal may be damaged. It could also be due to a partially closed valve in the recirculation line or a clogged filter. Circulation pumps and heat exchangers should also be checked for fouling.
The vacuum pump is usually installed in the chassis area of the car. They can be mounted next to the engine or on a lower support frame. They are usually fastened to the bracket using suitable shock absorbers and isolating elements. However, before installing the vacuum pump, be sure to check the vacuum pump’s wiring harness before connecting it to the vehicle.
In many experimental setups, a vacuum pump is essential. However, improperly installed vacuum pumps can expose users to harmful vapors and chemicals. Appropriate plugs and belt guards should be installed to prevent any accidental chemical exposure. It is also important to install a fume hood for the pump.
In most cases, vacuum pumps come with installation manuals and instructions. Some manufacturers even offer start-up assistance if needed.
editor by CX 2023-04-19
China Ss316l Electric Motor Explosion-proof Food Grade Fuel Hand Sterilizer High Pressure Honey High Pressure Pump Multistage Pump 48V vacuum pump adapter
Guarantee: 2 several years
Tailored help: OEM, ODM
Product Number: PP
Application: Meals and Beverage Market, Washing and Cleansing, Wastewater Transportation and Flood Manage, H2o Treatment method Answers
Horsepower: TBD
Energy Source: Electric
Strain: TBD
Structure: Multistage Pump
Outlet Dimensions: G1
Voltage: 48V
Power: TBD
OEM: Parameter Customization
Material: 304/316L Stainless Steel
Main Components: Pump
Key Marketing Factors: Energy-Saving /Higher Effective / Vacuum /Evaporator
Keywords and phrases: Rotor Pump/Optimistic Displacement Pump/Lobe Pump
Packaging Information: Export Regular Bundle
Port: HangZhou/ZheJiang
Items Description Fundamental contents High-strain drinking water pump, the most widely employed need to be the miniature high-force water pump. Simply because it has the characteristics of substantial pressure, tiny dimension, easy to have, and can be pushed by a auto battery, it is frequently utilized for cleaning, spraying, spraying, and pressurizing.Attributes and parameters of substantial-pressure drinking water pumps micro h2o pump, micro higher stress h2o pump, 24V high pressure water pump Mini high-strain water pump (Xinweicheng manufacturer)-self-priming, ultra-higher stress, little dimensions (HSP collection) Design: HSP11050 (Xinweicheng) Pressure: eleven kg Flow fee: 7L/MinIts principal attributes are: 1. Extremely-high pressure (11kg MAX), huge flow (7L/MIN), higher suction (1m), low sounds secure self-priming purpose, no need to have to add “drinking water diversion” 1st, self The suction pace is incredibly fast. Overpressure, overheating double automated defense switch, automatic shutdown security when the output strain exceeds the highest stress automatic protection when the temperature is way too higher. Two kinds of interfaces can be connected to comfortable and tough pipes respectively, geared up with metallic joints, which are not simple to injury. Integrating the positive aspects of self-priming pumps and chemical pumps, it is synthesized with a range of corrosion-resistant imported resources, and has the qualities of acid resistance, alkali resistance, and corrosion resistance. The pump human body is separated from the motor, Laboratory 1000ml or 2000ml All Glass Holder Unit Solvent Filtration Apparatus HPLC Filter System and the operating medium does not contact the motor. There are no mechanical elements in the pump body, and there is no mechanical use. It operates smoothly, can be idling, and has an incredibly prolonged services lifestyle. beautiful workmanship, tiny dimension, light bodyweight, steady efficiency, effortless installationMini large-force water pump use can pump drinking water, liquid (answer), pressurize the water outlet (highest stress is up to 11 kg), suitable for liquid spraying, spraying, washing, irrigation, showering, transfer, lifting, cleansing and a lot of other instances.Software selection of micro large pressure drinking water pump clients in many fields this sort of as water therapy, liquid sampling, scientific study, instrumentation, chemical investigation, health care, medicine and hygiene, bioengineering, automatic manage, environmental defense, and many others.Variety CZPT for miniature water pumps:1. Huge movement requirements (about 4-twenty liters/minute), minimal force demands (about 1-3 kg), largely employed for water circulation, drinking water sampling, lifting, and so on., High quality Oil cost-free vakum pompasimedikal vakum pompasi vacuum pump milking machines vakum pompasi for dairy cows demanding minimal sound, prolonged life, and large self-priming Procedure, and many others., BSP, CSP, and so on. series can be selected2. The movement fee is not high (about 1 to 5 liters/minute), but the stress is relatively substantial (about 2 to 11 kg), it is mostly employed for spraying, pressurizing, auto washing, etc. It does not need to operate for a long time beneath substantial stress or hefty load. , You can decide on ASP, HSP, and many others. series 3. Utilized for tea desk pumping, spraying, etc., the quantity is as little as attainable, the stream charge is small, and the sound is reduced (about .1 to 3 liters/min), and ASP series are optional. Fourth, substantial-temperature doing work medium (-one hundred ℃), require to pump h2o or fuel (may possibly be water-gas combination or idling, dry running events), benefit quantity, noise, ongoing use and other performance. The pump demands to run idling and dry for a lengthy time. If there is the two h2o and gasoline in the pipeline, you need to have to select the WKA sequence of drinking water and gas twin-function pumps. The WKA sequence of miniature h2o pumps are specifically suitable for occasions where h2o and air are current. For the over programs, WKA collection can be chosen. 5. There is a large prerequisite for the flow price (more than twenty liters/min), but the medium is made up of a little sum of oil, solid particles, residues, Gas Sampling Cosmetic Health care Gear DC Micro Electric Air Pump 1224V Lab EPDM Mini Diaphragm Vacuum Pump and so forth.3 collection of micro submersible pumps, QZ (medium circulation fee 35-forty five liters/moment), QD (big circulation fee 85-ninety five liters/moment), QC (super big circulation charge a hundred thirty five-a hundred forty five liters/minute), and DC submersible pumps can be picked Pump. Connected Merchandise Our factory ProviderWe have established some overseas agent place of work to make the soon after-product sales serivce already ,so it can will be provider client in quickly response .also in our headquarter services team ,there is a skilled staff which can assistance customer in 7*24 several hours .1. Buyer inquiry and session (URS paperwork)2. Confirmation of therapy program (DQ files &PID Drawing)3.Quotation offer with the technolgy doc (Quotation PI )4.Engineering and Producing (Prodcution &Quality inspection )5. Solution inspection (Excess fat files)6. Supply arrangement and loading operate (total set Cargo paperwork)7. Following-product sales support (OQ,PQ ,SAT files) FAQone.What about your manufacturing facility?Our factory is located in HangZhou city ,ZHangZhoug Province and have much more than fifteen many years knowledge on machinery producing.2.How will your organization handle the equipment quality ?We have a competent expert crew ,we will examine each and every creation proceed .also Devices will be examined in our plant prior to cargo .3.How long the guarantee will be?We give 1 yr warranty for the device working ,but we will manage complete -lifestyle provider for the device .4.Which sort payment do your firm do now ?We settle for Western Union, T/T ,D/P,D/C and irrevocable L/C payable and so forth.5.Can we become your distributor in our nation?Of course, we really welcome you! Far more details will be reviewed if you are intrigued in being our agent.6.Why we select “JOSTON “?1. We boost the trustworthiness of product’s top quality and functioning lifestyle . 2. We lessen the consumption value of the solution in the working. 3. We improve analysis personnel’s capability to provide a imaginative layout 4. We use top systems in our merchandise development and innovation, and thereby improve the competitive edge of items.7.Do you supply installation products in oversea?Sure, if need, we can deliver our engineer to your plant to assist you do set up and fee.8.How can we know the buy manufacturing status ?We will prepare the particular person to just take photo or video clip during manufacturing in every single 7 days to make you to know the manufacturing standing.When goods are completed,we will consider thorough photos or movie for your examining ,right after approve ,then we will prepare shipment .also you can prepare Fat in our plant when the items is completely ready here9.what is kind services do you offer prior to producing purchase ?1.according to your firm URS ,we will make the design drawing accoridingly.2.soon after your organization approved drawing ,we will make quotation.3. last we make arrangement on payment conditions ,supply time ,package , Double Heads Hose With Restriction Valve Cow Goat Sheep Electrical Milking Equipment Pulsation Vacuum Pump Milker cargo and so on.10.how about your organization after-sale support ?1. We offer prolonged-term following-sale provider. 2. we can do set up and fee for the products in your plant if required .3. Meanwhile, you can contact or e-mail us to seek the advice of on any appropriate concern given that we have a particular line for after-sale services. Alternatively, you can talk on-line with us to remedy any difficulty.
What Are Vacuum Pumps?
Vacuum pumps use air flow as the source of energy. The system is ideal for dewatering wet media, creating filter cakes, and pneumatically moving materials through a pipe. A vacuum pump works through air flow that is moved by differential pressure. The pump’s air flow develops a vacuum in a chamber that is called the vacuum box. As the air flow collects gas at a faster rate than atmospheric pressure, it is considered the “heart” of a vacuum system.
Principles of operation
Vacuum pumps work by reducing the volume of air that moves through them. Depending on the design, there are several different types of vacuum pumps. All of these types operate under the same principles, but have their own special features. Here are some of their most important characteristics. In addition to their capacity, the main differences between these pumps are their manufacturing tolerances, materials of construction, and level of tolerance for chemicals, oil vapor, and vibration.
Vacuum pumps create a partial or low-pressure vacuum by forcing gas molecules from their high-pressure states to their low-pressure states. However, these pumps can only achieve a partial vacuum, and other methods are necessary to reach a higher level of vacuum. As with all pumps, there are several ways to increase the level of a vacuum.
First, consider the type of vacuum you want. This is the most important factor when choosing a vacuum pump. If you need a high level of vacuum, you’ll need a high-quality vacuum pump. High-quality vacuum pumps have a high pressure limit, while ultrahigh-quality pumps are capable of achieving a very low vacuum. As the pressure decreases, the amount of molecules per cubic centimeter decreases and the quality of the vacuum increases.
Positive displacement pumps are best suited for low and medium-pressure systems. But they can’t reach high vacuum, which is why most high-pressure systems use two pumps in tandem. In this case, the positive displacement pump would stall and the other one would be used instead. Similarly, entrapment pumps have higher-pressure limits, so they must be refreshed frequently or exhaust frequently when there is too much gas to capture.
Another important aspect of vacuum pump operation is its speed. The speed of pumping is proportional to the differential pressure across the system. Therefore, the faster the pumping speed, the lower the draining time.
Design
A vacuum pump is a mechanical device used to generate a vacuum. It can create a low or high vacuum. These pumps are used in the process of oil regeneration and re-refining. The design of a vacuum pump must be compatible with the vacuum. The pump’s mass and speed should be matched.
The design of a vacuum pump is important for many reasons. It should be easy to use and maintain. Vacuum pumps need to be protected from external contamination. For this reason, the oil must be kept clean at all times. Contamination may damage the oil, resulting in pump failure. The pump’s design should include features that will prevent this from happening.
The main objective of a vacuum pump is to remove air and other gases from a chamber. As the pressure of the chamber drops, the amount of molecules that can be removed becomes more difficult. Because of this, industrial and research vacuum systems typically require pumps to operate over a large pressure range. The range is generally between one and 10-6 Torr. A standard vacuum system uses multiple pumps, each covering a portion of the pressure range. These pumps can also be operated in a series to achieve optimal performance.
The design of a vacuum pump can vary depending on the application and the pressure requirement. It should be sized appropriately to ensure that it works properly. There are several different types of pumps, so selecting the right pump is essential to maximizing its efficiency. For example, a slow running vee belt drive rotary vane vacuum pump will have a lower running temperature than a fast-running direct-drive pump.
Performance
The performance of a vacuum pump is an important indicator of its overall condition. It helps determine whether the system is performing optimally and how high the ultimate vacuum level can be achieved. A performance log should be maintained to document variations in pump operating hours and voltage as well as the temperature of the pump’s cooling water and oil. The log should also record any problems with the pump.
There are several ways to increase the performance of a vacuum pump. For example, one way is to decrease the temperature of the working fluid. If the temperature of the fluid is too high, it will lead to a low vacuum. A high temperature will make the vacuum degree of the pump even lower, so heat transfer is an important part of the process.
Nozzles are another major component that impacts the performance of a vacuum pump. Damage or clogging can result in a compromised pumping capacity. These problems can occur due to a number of causes, including excessive noise, leakage, and misassembled parts. Nozzles can also become clogged due to rusting, corrosion, or excess water.
Performance of vacuum pump technology is vital for many industries. It is an integral part of many central production processes. However, it comes with certain expenses, including machines, installations, energy, and maintenance. This makes it essential to understand what to look for when purchasing a vacuum pump. It is important to understand the factors that can influence these factors, as they affect the efficiency of a vacuum pump.
Another important factor in determining the performance of a vacuum pump is throughput. Throughput is a measurement of how many molecules can be pumped per unit of time at a constant temperature. Moreover, throughput can also be used to evaluate volume leak rates and pressure at the vacuum side. In this way, the efficiency of a vacuum pump can be judged by the speed and throughput of its leaks.
Atmospheric pressure
Vacuum pumps work by sucking liquids or air into a container. The amount of vacuum a pump can create is measured in pressure units called atms (atmospheric pressure). The pressure of a vacuum pump is equal to the difference between atmospheric pressure and the pressure in the system.
The amount of force produced by air molecules on each other is proportional to the number of impacts. Therefore, the greater the impact, the higher the pressure. In addition, all molecules have the same amount of energy at any temperature. This holds true for both pure and mixture gases. However, lighter molecules will move faster than heavier ones. Nevertheless, the transfer of energy is the same for both.
The difference between atmospheric and gauge pressure is not always straightforward. Some applications use one term to describe the other. While the two concepts are closely related, there are key differences. In most cases, atmospheric pressure is a higher number than gauge pressure. As a result, it can be confusing when choosing a vacuum pump.
One method is to use a U-tube manometer, a compact device that measures the difference between atmospheric pressure and vacuum. This device is commonly used for monitoring vacuum systems. It can measure both negative and positive pressure. In addition, it uses an electronic version of a gauge.
The atmospheric pressure affects the performance of a vacuum pump. When working with porous materials, the pump must overcome leakage. As a result, it must be equipped with enough capacity to compensate for variations in the porosity of the work piece. This is why it is critical to buy a vacuum pump that has a large enough capacity to handle the variation.
Typical application
Vacuum pumps are used in a variety of applications. They generate low and high pressures and are used to evaporate water or gases from various materials. They are also used in petroleum regeneration and re-refining processes. Typical applications of vacuum pumps include: a.
b. Rotary vane pumps are used in a variety of vacuum applications. They are suitable for industrial applications, freeze drying and cabinet making. They use oil as a sealant and coolant, allowing them to perform well in a variety of applications. This makes them ideal for use in a variety of industries.
The pumping rate of the vacuum pump is important. This refers to the volume pumped from a given point at a given rate. The higher the speed, the faster the pump will expel the air. Depending on the gas composition, this number will vary. When choosing a vacuum pump, gas composition and process requirements should be considered.
Vacuum pumps are used in a variety of industries from laboratories to medical facilities. In medical applications, they are used in radiation therapy and radiopharmaceuticals. They are also used in mass spectrometers, which are instruments used to analyze solid, liquid, or surface materials. Vacuum pumps are also used in decorative vacuum coatings and Formula 1 engine components. A trash compactor is another example of using a vacuum pump.
Vacuum pumps are used in a variety of applications including water purification and aeration. Vacuum pumps are also used in portable dental equipment and compressors in the dental industry. Vacuum pumps are also used in molds for dental implants. Other common applications for vacuum pumps include soil aeration and air sampling.
editor by czh 2023-02-15
China 60W110V220V380V Low noise electric motor twin piston oil-free pump easy to maintain for Lab vacuum pump belt
Custom-made help: OEM, ODM, OBM
Model Quantity: VN-eighteen, VN-18
Application: Other
Horsepower: 60W
Energy Supply: Electrical
Strain: -80kpa
Structure: Vacuum Pump
Voltage: 220V, 220V
Power: 60W, 60W
MOQ: one
Stream charge: 15L/MIN
Vacuum: -80KPA
Excess weight: 1.4KG
Use: Industrial
Motor: AC Motor
Model: VN-18
Packaging Details: Neutral carton packaging
Specification
| item | value |
| Customized support | OEM, ODM, OBM |
| Brand Name | Jian yue |
| Model Number | VN-18 |
| Place of Origin | China |
| Application | Other |
| Horsepower | 60W |
| Power Resource | Electric |
| Pressure | -80kpa |
| Structure | Vacuum Pump |
| Outlet Dimensions | |
| Voltage | 220V |
| Power | 60W |
| Model Amount | VN-eighteen |
| MOQ | 1 |
| Voltage | 220V |
| Power | 60W |
| Flow rate | 15L/MIN |
| Vacuum | -80KPA |
| Weight | 1.4KG |
Disadvantages of using a vacuum pump
A vacuum pump is a device that pulls gas molecules out of a volume and leaves a partial vacuum. Its main function is to create a relative vacuum within a given volume. There are several types of vacuum pumps. Some of them are better suited for specific purposes than others. However, there are some disadvantages to using a vacuum pump.
Application of vacuum pump
Vacuum pumps are invaluable tools in many industrial and scientific processes. They are often used to move gas and other harmful substances and to clear clogged drains. They are also used to support mechanical equipment. For example, they can be mounted on the engine of a motor vehicle or the power hydraulic component of an aircraft. No matter how they are used, they should fit the application.
The principle of a vacuum pump is to draw gas from a sealed chamber to create a partial vacuum. Over the years, vacuum pump technology has evolved from its original beginnings to its current form. Today, there are many types of vacuum pumps, including rotary vane pumps, momentum transfer pumps, and regeneration pumps.
The semiconductor industry is a major user of vacuum pumps. Among other applications, these pumps are commonly used for mounting circuit boards, securing components, blowing and jetting, and pumping. The use of renewable resources has paved the way for widespread semiconductor production, where vacuum pumps are crucial. This manufacturing shift is expected to boost vacuum pump sales across Europe. 
The most common types of vacuum pumps are positive displacement and rotary vane pumps. Positive displacement pumps are most effective for rough vacuum applications and are usually paired with momentum transfer pumps. These pumps are used in pharmaceutical, food and medical processes. They are also used in diesel engines, hydraulic brakes and sewage systems.
Positive displacement pumps are used to create low vacuum conditions and create a partial vacuum. These pumps create lower air pressure by enlarging the chamber and allowing gas to flow into the chamber. The air in the cavity is then vented to the atmosphere. Alternatively, momentum transfer pumps, also known as molecular pumps, use high-speed rotating blades to create dense fluids. 
Their drawbacks
Vacuum pumps are useful in industrial applications. However, they are not perfect and have some drawbacks. One of them is that their output is limited by the vacuum hose. Vacuum hoses are the bottleneck for vacuum pump performance and evacuation rates. The hose must be kept free of water and organic matter to ensure the highest possible vacuum.
Dry vacuum pumps do not have these problems. They may be more cost-effective but will increase maintenance costs. Water consumption is another disadvantage. When pond water is used, the pump puts additional pressure on the treatment facility. Additionally, contaminants from the gas can become trapped in the water, shortening the life of the pump.
Another disadvantage of vacuum pumps is their limited operating time at low vacuum. Therefore, they are only suitable for extremely high vacuum levels. Diaphragm pumps are another option for industrial applications. They have a sealed fluid chamber that allows a moderate vacuum. They also feature short strokes and a low compression ratio, making them quieter than their reciprocating counterparts.
Vacuum pumps are used in many industrial and scientific processes. They can be used to transport hazardous materials or clear clogged drains. They are also used in rear doors and dump tanks. Certain types of vacuum pumps can cause fluid blockages, which can be harmful. The vacuum pump should also be well suited to the fluid in it to avoid contamination.
Another disadvantage is the lack of proper vacuum system testing equipment. Mechanics often underestimate the importance of a properly functioning vacuum system. Most stores lack the equipment needed for proper troubleshooting. Typically, mechanics rely on the cockpit vacuum gauge to determine if the pump is working properly.
Some vacuum pumps are capable of providing constant vacuum. These pumps are also capable of eliminating odors and spills. However, these advantages are outweighed by some disadvantages of vacuum pumps.
editor by czh 2023-02-14
china Custom Single Stage Centrifugal Pump Electric Motor Water Pump Dk Pump Switch Pump Vacuum Pump manufacturers
Product Description
Product Description
DK series are solitary stage centrifugal l pumps,can be utilized to transfer thoroughly clean water or other equivalent water in actual physical and chemical properties It is ideal for industrial use and urban water source, force boosting foe substantial structures and fireplace program, backyard irrigation, CZPT -distance drinking water transfer, heating ventilation and air controlling, circulation and stress boosting for chilly and sizzling water, and supporting equipment ect.
In depth Photos
| Model | Power(HP) | Q.maxn(L/MIN) | H.max(M) | S.Head(M) | Pace(r/min) |
| 1DK-fourteen | .seven | seventy five | fourteen | nine | 2850 |
| 1DK-20 | .seventy five | 90 | 18 | 9 | 2850 |
| 1.5DK-20 | 1 | 780 | 20 | nine | 2850 |
| CM-20 | 1 | 260 | twenty | 9 | 2850 |
FAQ
Q1. Elestar is a factory or trading company?
A.We are a manufactory with more than 10 years pump production experience.
Q2. Where is your factory located?
A: Our factory is located in Fuan City, ZheJiang Province, China. Fuan city is close to HangZhou Port.
Q3. Is OEM and ODM service available?
A: Yes. We supply flexible experience of OEM & ODM service.
This autumn. What’s your delivery time?
A. The sample can be sent to customer within 10~15 days. The batch order can be shipped within 35 after receiving original L/C or TT deposit.
Q5. What are your payment terms?
A: 100%TT or irrevocable L/C at sight. We accept 30% deposit and balance T/T against copy of Bill of Lading for repeat orders.
Q6. How about your warranty?
A. We offer 1-year product life guarantee and a generous 1-year warranty on all purchases that begin with the Bill of Lading.
Q7. How can I get some sample?
A. Sample are available, the buyer is expected to cover the sample costs and freight. The sample costing can be deducted if you place batch order.
Q8.: What is your company’s available production capacity?
A: 50000~60000 pieces of pump per month.
Q9: Do you have any certification?
A: Yes, CE & ISO9001 can be provided, if customer need special certification for custom clearance we can also provide.
EP types and manufactures a broad assortment of industrial vacuum pump technologies. From ” to 29.90″ Hg, from major pump to boost, from constructive displacement to dynamic, our vacuum pumps include a vast assortment of working pressures, principles and systems, including oil-totally free/dry and oil-lubricated rotary vane, oil-free / Dry rotary screw, claw vacuum pumps, radial vacuum pumps and regenerative blowers configured for vacuum apps.
china best Water Ring Vacuum Pump Without Motor 2sk Series Cast Iron Electric Air Pump Depending on The Type Customers Request manufacturers
Solution Description
2SK series two-phase water-ring vacuum pump and 2SK-P1 series two-phase drinking water-ring vacuum pump-atmospheric jet pump device are vacuum pumps and The vacuum unit has the traits of higher vacuum degree, large pumping speed in large vacuum range, compact framework, dependable use and convenient assembly and disassembly.
The device is composed of 2SK water ring vacuum pump and 1-phase atmospheric jet pump. End users can use the two-stage h2o-ring vacuum pump by itself in accordance to their needs.
2SK h2o ring vacuum pump or unit is used to pump air or other gas insoluble in drinking water, totally free of strong particles and CZPT -corrosive, so as to type a particular degree of vacuum in a shut container. It is ideal for light-weight textile, food, metallurgy, chemical market. It is utilized in vacuum evaporation, vacuum focus, vacuum resuscitation, vacuum drying, vacuum smelting and other processes in industrial sector.
Solution Images:
Working Principle:
The doing work theory of the 2SK water ring vacuum pump is shown in Figure 1. The impeller (5) is eccentrically set up in the pump physique (3). When the impeller rotates, the h2o is thrown all around by the centrifugal power. A rotating water ring (6) is fashioned amongst the impellers. The interior area of the upper portion of the water ring is in contact with the impeller hub. When the impeller rotates clockwise, in the procedure of the first half rotation, the interior surface area of the h2o ring progressively separates from the hub, and the cavity formed between the adjacent two blades gradually boosts. , the pumped fuel passes through the pump inlet pipe (4), and is repeatedly sucked into the cavity via the crescent-formed suction gap (7) in the course of the CZPT 50 percent-change, the interior surface area of the h2o ring steadily ways the hub, and the area among the two adjacent blades The cavity is progressively decreased and the fuel is compressed, so the force is constantly improved. When the strain is enhanced to be better than the exterior strain, the gas is discharged, so that the gas in the sealed container is repeatedly drawn absent to kind a certain vacuum.
Figure 1 Functioning theory diagram
- Exhaust pipe 2. Air outlet 3. Pump entire body 4. Consumption pipe 5. Impeller 6. H2o ring 7. Suction hole
The atmospheric jet vacuum pump is a jet pump, and its working principle is briefly described as follows: Owing to the motion of the 2SK drinking water ring vacuum pump, the pumped container types a specific pre-vacuum. When it is close to the greatest vacuum of the pump, the atmospheric pump is turned on. At this time, The pressure distinction between the exterior environment (or pressurized fuel) and the ingestion pipe is very huge. Underneath the action of this pressure distinction, the atmosphere (or fuel) is rapidly drawn into the suction pipe. After passing by way of the nozzle of the atmospheric pump, the airflow speed is additional improved, so The force drops speedily so that a comparatively large vacuum (apparently larger than the pump’s ultimate vacuum) is designed in the nozzle, which carries on to attract the gasoline getting pumped into the pump.
Framework Description:
Figure two Structural diagram of two-phase water ring pump with air pumping potential previously mentioned 1.5m3/min (2SK-1.5)
The structure of the 2SK h2o ring vacuum pump with an air extraction potential of 1.5m3/min or much more is shown in Determine 2. The CZPT and brief impellers 17 and sixteen are mounted on the shaft 2 with keys, the middle of the two impellers is positioned with a shaft sleeve twenty, and locked with a garden nut. It constitutes the whole rotor element, and is eccentrically set up in the pump body, supported on two single-row radial ball bearings, and the rotor element is connected with the motor shaft by a coupling 18, so that it rotates at the exact same velocity with the motor, and it is CZPT . The impeller 17, the CZPT pump human body 9 and the suction portion sort a substantial vacuum phase, the brief pump entire body 5, the short impeller 16 and the discharge portion form a reduced vacuum phase, and the exhaust port of the high vacuum phase and the suction port of the low vacuum phase are related by a connecting pipe ( 2SK-1.5 with out this connecting pipe) gets a two-stage series, the two stages are divided by an intermediate wall (A) 7 and an intermediate wall (B) 6, there are exhaust holes on the intermediate wall (A), and the intermediate wall (B) There is a suction port on the prime.
Determine 3 Composition diagram of 2SK-.4, 2SK-.8 two-stage drinking water ring vacuum pump
The composition of 2SK-.4, 2SK-.8 two-stage h2o ring vacuum pump is revealed in Determine 3, and its higher and lower vacuum phase composition is basically the very same as that of the pump proven in Determine 2 (no connecting pipe). Employing a unique extended shaft motor, the CZPT and brief impellers are mounted on the shaft with keys, but they can be floated axially and eccentrically put in the CZPT and short pump bodies.
The seals at equally ends of the 2SK water ring vacuum pump use oil-impregnated asbestos packing or mechanical seals.
One particular finish of the large vacuum stage has a drinking water inlet hole, from which the supplementary drinking water enters the CZPT pump physique of the large vacuum stage, and the supplementary drinking water of the minimal vacuum stage is discharged from the large vacuum phase. (2SK-twelve, 2SK-twenty, 2SK-30 low vacuum amount make-up drinking water is also equipped from the h2o offer pipe, but the amount should be adjusted through the valve). The substantial and lower vacuum stages are firmly connected with each other by stress bolts.
Item overall performance and parameters:
2SK-Tow Phase H2o Ring Vacuum Pump and 2SK-Pone Tow Stage Drinking water Ring Vacuum Pump-Fuel CZPT Vacuum CZPT ry technical policies are illustrated in Chart 1 and Chart 2
Chart 1
| Type | Capacity | Pressure limits Mpa(mmHg) |
Power KW |
Speed r/min |
Supplying potential L/min |
Diameter | |
| Max | Suction pressure=-.093Mpa | ||||||
| 2SK-.four | .four | .25 | -.096(-725) | 2.two | 2860 | three~5 | Gone′′ |
| 2SK-.8 | .eight | .five | -.096(-725) | three | 2880 | 5~8 | Gone′′ |
| 2SK-1.five | one.5 | .9 | -.097(-730) | four | 1440 | ten~15 | φ40 |
| 2SK-3 | three | two | -.098(-735) | seven.5 | 1440 | fifteen~twenty | φ40 |
| 2SK-6 | 6 | four | -.098(-735) | 15 | 1460 | twenty five~35 | φ70 |
| 2SK-twelve | twelve | 8 | -.098(-735) | 22 | 970 | forty~fifty | φ100 |
| 2SK-20 | 20 | fourteen | -.098(-735) | 37 | 740 | 60~80 | φ125 |
| 2SK-30 | 30 | 20 | -.098(-735) | 55 | 740 | 70~ninety | φ125 |
Chart 2
| Model | Capacity m3/min | Pressure restrictions MPa(mmHg) |
Power KW |
Speed r.p.m |
Supplying capability L/min |
||
| Suction strain -.093MPa (-700mmHg) |
suction strain -.097MPa (-730mmHg) |
suction force -.099MPa (-750mmHg) |
|||||
| 2SK-.4P1 | .28 | .24 | .two | -.099(-750) | 2.2 | 2840 | 3~five |
| 2SK-.8P1 | .56 | .forty eight | .4 | -.099(-750) | 3 | 2880 | 5~8 |
| 2SK-1.5P1 | 1.05 | .nine | .seventy five | -.099(-750) | four | 1440 | ten~15 |
| 2SK-3P1 | 2.one | one.eight | 1.five | -.099(-750) | 7.5 | 1440 | fifteen~twenty |
| 2SK-6P1 | 4.2 | 3.6 | 3 | -.099(-750) | fifteen | 1450 | 25~35 |
| 2SK-12P1 | eight.four | 7.two | 6 | -.099(-750) | 22 | 970 | forty~fifty |
| 2SK-20P1 | 14 | twelve | 10 | -.099(-750) | forty five | 740 | 60~eighty |
| 2SK-30P1 | 21 | 18 | 15 | -.099(-750) | fifty five | 740 | 70~90 |
Notice:
1.The performance normal in chart implies the efficiency regular on the situation of following situation.
- Environment force:. 1013Mpa (760mmHg)
- Drinking water tempreture:15ºC
- Air tempreture:20ºC
- The relative humidity 70%
2.Supplying water capability: value of inlet force -.05Mpa(-400mmHg)
3.Performance authorized uncertainty: ±10%
Item Application:
one. 2SK drinking water ring vacuum pump is utilised to pump air and other gases that are CZPT -corrosive, insoluble in drinking water and cost-free of solid particles, so as to acquire a greater vacuum in a closed container.
2. 2SK water ring vacuum pump is suitable for functioning situations the place the suction stress is decrease than -.08mpa. 2sk collection drinking water ring drinking water ring pumps are suited for doing work problems exactly where the suction strain is reduced than -.096mpa.
three. 2SK h2o ring vacuum pumps are extensively used in vacuum evaporation, vacuum focus, vacuum resuscitation, vacuum drying and vacuum smelting in foodstuff, textile, chemical, pharmaceutical and metallurgical industries and electronic fields.
4. 2SK h2o ring vacuum pump has the characteristics of higher vacuum degree, high pumping speed in the vacuum location, compact structure, close operating and hassle-free upkeep.
five. The 2SK series is used in the functioning problems the place the suction stress is reduced than -.08MPa.
Solution Attributes:
1. Underneath the exact same shaft CZPT of 2SK water ring vacuum pump, the shaft CZPT is considerably larger than that of 2bv vacuum and 2BE h2o ring pump.
two. The 2SK water ring vacuum pump has the attributes of large vacuum diploma and substantial pumping pace in the substantial vacuum area.
three. 2SK series drinking water ring vacuum pump is equivalent to two SK water ring pumps. Considering that the h2o ring pump can only achieve a vacuum degree of -.093mpa, the 2SK water ring pump with a CZPT er pumping velocity and a vacuum degree of -.098mpa has been designed.
Firm Profile:
This vacuum pump is created for deeper vacuums down to 75 microns. Precision machined main pumps eliminate moisture from air conditioning methods for risk-free refrigerant addition. This one-phase vacuum pump is best for automotive air conditioning, HVAC operate, and other functions that call for a high vacuum from a compact pump. Very first stage vacuum to 75 microns Durable die-cast aluminum housing and handy prime deal with Easy to use
china supplier Electric Car Motor Vacuum Dispenser Fire Pump Conprofe Green Machining Airlube Mem104-V3.0 manufacturers
Merchandise Description
Electric Automobile CZPT Vacuum Dispenser CZPT Pump Conprofe CZPT Machining Airlube MEM104-V3.
Product Description
| Item Title | Electric Vehicle CZPT Vacuum Dispenser CZPT Pump Conprofe CZPT Machining Airlube MEM104-V3. | |
| Product No. | Airlube MEM104-V3. | |
| Mechanical | Oil Tank Ability (L) | 5 |
| No. of Nozzles | 10 | |
| Pneumatic | Air Inlet Diameter (mm) | Φ12 |
| Air Outlet Diameter (mm) | Φ6~8 | |
| Oil Consumption (L/h) | one hundred~five hundred (adjustable) | |
| Air Use (L/min) | one hundred~600 | |
| Oil Outlet Diameter (mm) | Φ4 | |
| Needed Air Force (MPa) | .5~.eight | |
| Compressed Air CZPT | ISO 8573-1, Course-five | |
| Electrical | Electrical power (W) | 150 |
| Power CZPT | AC220V (DC24V CZPT ) | |
| Oil Amount Gauge | Float switch | |
Product advantages:
1.Specific connector module provided to empower best connections between tube benders of any makes or versions
2.Specially created electric injection pump enables for better injector amount adjustment
three.Oil use down by fifty% vs. standard lubrication methods many thanks to precision injection control
four.Precision usage metering technique outfitted to ensure reputable costing and process adjustment
five.Can be linked to CNC control system to realize auto handle, lowering guide procedure.
In depth Photos
Greatest Sellers
Check out more products,make sure you click on below…
Organization Profile
Vacuum pumps incorporate rotary vane pumps, blend pumps, diaphragm pumps, and scroll pumps, offering a assortment of vacuum pump remedies. Rotary vane direct drive vacuum pumps provide a dependable source of vacuum for a variety of laboratory products like freeze dryers, protecting managed atmosphere glove containers, and centrifugal vacuum concentrators. EP vacuum pumps integrate a large-efficiency rotary vane pump with a chemically resistant diaphragm pump for minimal routine maintenance, prolonged-lasting vacuum pumps.
12V 24V DC Motor Brushed Motor Gear Motors for Electric Clothes Drying Hanger Rack
12V 24V DC Motor Brushed Motor Gear CZPT for CZPTtric Clothing Drying Hanger Rack
Model:D59R-24v30w-30rpm
| Sort | dc worm equipment motor | ||
| Motor Diameter | 59mm | ||
| Voltage | 12v 24v 36v 42v 48v | ||
| Energy | ≤60W | ||
| Torque | ≤12N.M | ||
| Velocity | ≤250RPM | ||
| Gear of ratio | fifty six:1 28:1 70:1 | ||
| Gear Modulus | 70:1 M=.8 56:1 28:1 M=1 |
||
| Substance of equipment | CZPT /brass | ||
| OEM/ODM Provider | Accept | ||
| Use | CZPTtric garments rack ,electric adjustable table ,electric clothing drying rack,blender device,garage doorway opener,electrical glass lifting ,other electrical tools . | ||
HangZhou Huiyun CZPT & CZPT Co.,Ltd is a subsidiary of HangZhou Wewin Motor Co.,Ltd.The manufacturing unit is situated in Xihu (West Lake) Dis.,HangZhou,we can design and manufacture of motors in accordance to all our customers’ calls for so much,we can manufacture about sixty,000 motors for each month.
Our primary marketplace:
CZPTe,CZPTica and Asia,including CZPT CZPT, Germany, Italy, France, Sweden, CZPT Point out,Brazil,India,Korea and so on.
Company Benefits:
1. Big creation ability, fast shipping.
2. Stringent QC inspecting policies: all items must be 100% inspected before shipping and delivery.
3. OEM/ODM services are obtainable
4. 24 hours on the internet support.
5. Prompt quotation for your inquiry
6. CZPT,dependability and prolonged product lifestyle.
7. Skilled producer offers aggressive cost.
8. Diversified prosperous experienced competent workers.
Far more Applications:
Automobile simulator ,garage door opener ,gate operator, wheelchair ,electric powered car ,h2o pump ,oil pump,vending equipment,stitching equipment, welding device, office clever equipment,ground polisher,truck carry,stair lift,hospital bed , hydraulic pump electric powered forklift.
RFQ:
Q: Are you investing business or company ?
A: We are Integration of market and trade, with in excess of 20 years experience in DC worm equipment motor. Our company have accrued expert generation line, complete management and powerful research assistance, which could match all of the customers’ needs and make them satisfaction.
Q: What is your major product?
–DC Motor: Equipment motor, Sq. motor, Stepped motor, and Micro motor
-Welding gear: Wire feeder, Welding rod, Welding Torch, Earth clamp, CZPTtrode holder, and Rectifier
Q: What if I do not know which DC motor I require?
A: Don’t fret, Deliver as a lot info as you can, our team will aid you locate the correct one you are looking for.
Q: What is your conditions of payment ?
A: Payment=1000USD, 30% T/T in progress ,balance just before shippment.
If you have one more question, pls come to feel free of charge to get in touch with us as under:
Q: How to supply:
A: By sea – Consumer appoint forwarder, or our sales team find suited forwarder for purchasers.
By air – Consumer provide acquire categorical account, or our product sales group locate suited specific for buyers. (Primarily for sample)
Other folks – Really,samples send out by DHL,UPS, TNT and Fedex and so forth. We set up to delivery merchandise to some spot from China appointed by purchasers.
Q: How lengthy is your supply time?
A: CZPTly it is 5-ten times if the products are in inventory. or it is fifteen-twenty days if the products are not in inventory, it is in accordance to amount.