Product Description
TaiBang Motor Industry Group Co., Ltd.
The main products is induction motor, reversible motor, DC brush gear motor, DC brushless gear motor , CH/CV big gear motors , Planetary gear motor ,Worm gear motor etc, which used widely in various fields of manufacturing pipelining, transportation, food, medicine, printing, fabric, packing, office, apparatus, entertainment etc, and is the preferred and matched product for automatic machine.
Motor Model Instruction
4RK25GN-C
| 4 | R | K | 25 | R | GN | C | |
| Frame Size | Type | Motor series | Power | Speed Control Motor |
Shaft Type | Voltage | Accessory |
| 2:60mm
3:70mm 4:80mm 5:90mm 6:104mm |
I:Induction
R:Reversible T:Torque |
K series | 6W
15W 25W 40W 60W 90W 120W 140W 180W 200W |
A:Round Shaft
GN:Bevel Gear Shaft GU:Bevel Gear Shaft |
A:Single Phase 110V
C:Single Phase 220V S:3-Phase 220V S3:3-Phase 380V S4:3-Phase 440V |
T/P:Thermally Protected
F:Fan M:Electro-magnetic |
Gear Head Model Instruction
4GN-100RC
| 4 | GN | 100 | K | |
| Frame Size | Shaft Type | Gear Reduction Ratio | Bearing Type | Other information |
| 2:60mm
3:70mm 4:80mm 5:90mm 6:104mm |
GN:Bevel Gear Shaft (60#,70#,80#,90# reduction gear head) GU:Bevel Gear Shaft GM:Intermediate Gear Head GS:Gearhead with ears |
1:100 | K:Standard Rolling Bearing
RT:Right Angle With Axile RC:Right Angle With Hollow Shaft |
Such as shaft diameter,shaft length,etc. |
Specification of motor 25W 80mm Fixed speed AC gear motor
| Type | Gear Tooth Output Shaft | Power (W) |
Frequency (Hz) |
Voltage (V) |
Current (A) |
Start Torque (g.cm) |
Rated | Gearbox Type | ||
| Torque (g.cm) |
Speed (rpm) |
Bearing Gearbox | Middle Gearbox | |||||||
| Reversible Motor | 4RK25GN-C | 25 | 50 | 220 | 0.30 | 1950 | 1950 | 1250 | 4GN/GU-K | 4GN10X |
| 25 | 60 | 220 | 0.27 | 1650 | 1620 | 1500 | 4GN/GU-K | 4GN10X | ||
Gear Head Torque Table(Kg.cm) (kg.cm×9.8÷100)=N.m
| Output Speed :RPM | 500 | 300 | 200 | 150 | 120 | 100 | 75 | 60 | 50 | 30 | 20 | 15 | 10 | 7.5 | 6 | 5 | 3 | ||
| Speed Ratio | 50Hz | 3 | 5 | 7.5 | 10 | 12.5 | 15 | 20 | 25 | 30 | 50 | 75 | 100 | 150 | 200 | 250 | 300 | 500 | |
| 60Hz | 3.6 | 6 | 9 | 15 | 18 | 30 | 36 | 60 | 90 | 120 | 180 | 300 | 360 | 600 | |||||
| Allowed Torque |
25W | kg.cm | 4 | 6.7 | 10 | 13.3 | 16 | 20 | 26.7 | 32 | 39 | 65 | 80 | 80 | 80 | 80 | 80 | 80 | 80 |
| 30W | kg.cm | 4.8 | 8 | 12 | 16 | 20 | 24 | 32 | 38 | 46 | 76 | 80 | 80 | 80 | 80 | 80 | 80 | 80 | |
| 40W | kg.cm | 6.7 | 11 | 16 | 21.3 | 28 | 33 | 42 | 54 | 65 | 80 | 80 | 80 | 80 | 80 | 80 | 80 | 80 | |
| Note: Speed figures are based on synchronous speed, The actual output speed, under rated torque conditions, is about 10-20% less than synchronous speed, a grey background indicates output shaft of geared motor rotates in the same direction as output shaft of motor. A white background indicates rotates rotation in the opposite direction. | |||||||||||||||||||
External Dimension
4I(R)K25/4A(GN)( )
| Type | Reduction Ratio | L1 mm |
L2 mm |
L3 mm |
| 4RK25GN | 1:3~1:20 | 86 | 32 | 118 |
| 1:25~1:180 | 85 | 44 | 130 |
4I(R)K25/4GN( )RC
4I(R)K25/4GN( )RT
Above drawing is for standard screw hole.If need through hole, terminal box, or electronic magnet brake, need to tell the seller.
Connection Diagram:
FAQ
Q: How about your company?
A:We are gear motor factory located in HangZhou city of China,we start from 1995 ,we have more than 1200 workers ,main products is AC micro gear motor 6W to 250W, AC small gear motor 100W to 3700W,brush DC motor 10W to 400W,brushless motor 10W to 750W,drum motor 60W to 3700W ,Planetary gearbox ,worm gearbox etc .
Q: How to choose a suitable motor?
A:If you have gear motor pictures or drawings to show us, or you tell us detailed specs like voltage, speed, torque, motor size, working mode of the motor, needed lifetime and noise level etc, please do not hesitate to let us know, then we can suggest suitable motor per your request .
Q: Can you make the gear motor with customize specifications ?
Yes, we can customize per your request for the voltage, speed, torque and shaft size and shape. If you need additional wires or cables soldered on the terminal or need to add connectors, or capacitors or EMC we can make it too.
Q: What’s your lead time?
A: Usually our regular standard product will need 10-15days, a bit longer for customized products. But we are very flexible on the lead time, it will depend on the specific orders.
Q: What is your MOQ?
A: If delivery by sea ,the minimum order is 100 pieces, if deliver by express, there is no limit.
Q: Do you have the item in stock?
A: I am sorry we do not have the item in stock, All products are made with orders.
Q: How to contact us ?
A: You can send us enquiry . /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Industrial |
|---|---|
| Speed: | Constant Speed |
| Number of Stator: | Single-Phase |
| Function: | Driving, Control |
| Casing Protection: | Closed Type |
| Number of Poles: | 4 |
| Samples: |
US$ 50/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
|
|
|---|
How Do You Maintain and Troubleshoot Vacuum Pumps?
Maintaining and troubleshooting vacuum pumps is essential to ensure their optimal performance and longevity. Here’s a detailed explanation:
Maintenance of Vacuum Pumps:
1. Regular Inspection: Perform regular visual inspections of the pump to check for any signs of damage, leaks, or abnormal wear. Inspect the motor, belts, couplings, and other components for proper alignment and condition.
2. Lubrication: Follow the manufacturer’s guidelines for lubrication. Some vacuum pumps require regular oil changes or lubrication of moving parts. Ensure that the correct type and amount of lubricant are used.
3. Oil Level Check: Monitor the oil level in oil-sealed pumps and maintain it within the recommended range. Add or replace oil as necessary, following the manufacturer’s instructions.
4. Filter Maintenance: Clean or replace filters regularly to prevent clogging and ensure proper airflow. Clogged filters can impair pump performance and increase energy consumption.
5. Cooling System: If the vacuum pump has a cooling system, inspect it regularly for cleanliness and proper functioning. Clean or replace cooling components as needed to prevent overheating.
6. Seals and Gaskets: Check the seals and gaskets for signs of wear or leakage. Replace any damaged or worn seals promptly to maintain airtightness.
7. Valve Maintenance: If the vacuum pump includes valves, inspect and clean them regularly to ensure proper operation and prevent blockages.
8. Vibration and Noise: Monitor the pump for excessive vibration or unusual noise, which may indicate misalignment, worn bearings, or other mechanical issues. Address these issues promptly to prevent further damage.
Troubleshooting Vacuum Pump Problems:
1. Insufficient Vacuum Level: If the pump is not achieving the desired vacuum level, check for leaks in the system, improper sealing, or worn-out seals. Inspect valves, connections, and seals for leaks and repair or replace as needed.
2. Poor Performance: If the pump is not providing adequate performance, check for clogged filters, insufficient lubrication, or worn-out components. Clean or replace filters, ensure proper lubrication, and replace worn parts as necessary.
3. Overheating: If the pump is overheating, check the cooling system for blockages or insufficient airflow. Clean or replace cooling components and ensure proper ventilation around the pump.
4. Excessive Noise or Vibration: Excessive noise or vibration may indicate misalignment, worn bearings, or other mechanical issues. Inspect and repair or replace damaged or worn parts. Ensure proper alignment and balance of rotating components.
5. Motor Issues: If the pump motor fails to start or operates erratically, check the power supply, electrical connections, and motor components. Test the motor using appropriate electrical testing equipment and consult an electrician or motor specialist if necessary.
6. Excessive Oil Consumption: If the pump is consuming oil at a high rate, check for leaks or other issues that may be causing oil loss. Inspect seals, gaskets, and connections for leaks and repair as needed.
7. Abnormal Odors: Unusual odors, such as a burning smell, may indicate overheating or other mechanical problems. Address the issue promptly and consult a technician if necessary.
8. Manufacturer Guidelines: Always refer to the manufacturer’s guidelines and recommendations for maintenance and troubleshooting specific to your vacuum pump model. Follow the prescribed maintenance schedule and seek professional assistance when needed.
By following proper maintenance procedures and promptly addressing any troubleshooting issues, you can ensure the reliable operation and longevity of your vacuum pump.
How Do Vacuum Pumps Assist in Freeze-Drying Processes?
Freeze-drying, also known as lyophilization, is a dehydration technique used in various industries, including pharmaceutical manufacturing. Vacuum pumps play a crucial role in facilitating freeze-drying processes. Here’s a detailed explanation:
During freeze-drying, vacuum pumps assist in the removal of water or solvents from pharmaceutical products while preserving their structure and integrity. The freeze-drying process involves three main stages: freezing, primary drying (sublimation), and secondary drying (desorption).
1. Freezing: In the first stage, the pharmaceutical product is frozen to a solid state. Freezing is typically achieved by lowering the temperature of the product below its freezing point. The frozen product is then placed in a vacuum chamber.
2. Primary Drying (Sublimation): Once the product is frozen, the vacuum pump creates a low-pressure environment within the chamber. By reducing the pressure, the boiling point of water or solvents present in the frozen product is lowered, allowing them to transition directly from the solid phase to the vapor phase through a process called sublimation. Sublimation bypasses the liquid phase, preventing potential damage to the product’s structure.
The vacuum pump maintains a low-pressure environment by continuously removing the water vapor or solvent vapor generated during sublimation. The vapor is drawn out of the chamber, leaving behind the freeze-dried product. This process preserves the product’s original form, texture, and biological activity.
3. Secondary Drying (Desorption): After the majority of the water or solvents have been removed through sublimation, the freeze-dried product may still contain residual moisture or solvents. In the secondary drying stage, the vacuum pump continues to apply vacuum to the chamber, but at a higher temperature. The purpose of this stage is to remove the remaining moisture or solvents through evaporation.
The vacuum pump maintains the low-pressure environment, allowing the residual moisture or solvents to evaporate at a lower temperature than under atmospheric pressure. This prevents potential thermal degradation of the product. Secondary drying further enhances the stability and shelf life of the freeze-dried pharmaceutical product.
By creating and maintaining a low-pressure environment, vacuum pumps enable efficient and controlled sublimation and desorption during the freeze-drying process. They facilitate the removal of water or solvents while minimizing the potential damage to the product’s structure and preserving its quality. Vacuum pumps also contribute to the overall speed and efficiency of the freeze-drying process by continuously removing the vapor generated during sublimation and evaporation. The precise control provided by vacuum pumps ensures the production of stable and high-quality freeze-dried pharmaceutical products.
How Do You Choose the Right Size Vacuum Pump for a Specific Application?
Choosing the right size vacuum pump for a specific application involves considering several factors to ensure optimal performance and efficiency. Here’s a detailed explanation:
1. Required Vacuum Level: The first consideration is the desired vacuum level for your application. Different applications have varying vacuum level requirements, ranging from low vacuum to high vacuum or even ultra-high vacuum. Determine the specific vacuum level needed, such as microns of mercury (mmHg) or pascals (Pa), and choose a vacuum pump capable of achieving and maintaining that level.
2. Pumping Speed: The pumping speed, also known as the displacement or flow rate, is the volume of gas a vacuum pump can remove from a system per unit of time. It is typically expressed in liters per second (L/s) or cubic feet per minute (CFM). Consider the required pumping speed for your application, which depends on factors such as the volume of the system, the gas load, and the desired evacuation time.
3. Gas Load and Composition: The type and composition of the gas or vapor being pumped play a significant role in selecting the right vacuum pump. Different pumps have varying capabilities and compatibilities with specific gases. Some pumps may be suitable for pumping only non-reactive gases, while others can handle corrosive gases or vapors. Consider the gas load and its potential impact on the pump’s performance and materials of construction.
4. Backing Pump Requirements: In some applications, a vacuum pump may require a backing pump to reach and maintain the desired vacuum level. A backing pump provides a rough vacuum, which is then further processed by the primary vacuum pump. Consider whether your application requires a backing pump and ensure compatibility and proper sizing between the primary pump and the backing pump.
5. System Leakage: Evaluate the potential leakage in your system. If your system has significant leakage, you may need a vacuum pump with a higher pumping speed to compensate for the continuous influx of gas. Additionally, consider the impact of leakage on the required vacuum level and the pump’s ability to maintain it.
6. Power Requirements and Operating Cost: Consider the power requirements of the vacuum pump and ensure that your facility can provide the necessary electrical supply. Additionally, assess the operating cost, including energy consumption and maintenance requirements, to choose a pump that aligns with your budget and operational considerations.
7. Size and Space Constraints: Take into account the physical size of the vacuum pump and whether it can fit within the available space in your facility. Consider factors such as pump dimensions, weight, and the need for any additional accessories or support equipment.
8. Manufacturer’s Recommendations and Expert Advice: Consult the manufacturer’s specifications, guidelines, and recommendations for selecting the right pump for your specific application. Additionally, seek expert advice from vacuum pump specialists or engineers who can provide insights based on their experience and knowledge.
By considering these factors and evaluating the specific requirements of your application, you can select the right size vacuum pump that meets the desired vacuum level, pumping speed, gas compatibility, and other essential criteria. Choosing the appropriate vacuum pump ensures efficient operation, optimal performance, and longevity for your application.
editor by CX 2024-03-06
China Good quality Factory Direct Sale 220V High Efficiency OEM Dry Piston Vacuum Pump Air Compressor vacuum pump for ac
Product Description
Product Description
| ITEM NO | HC1500A2 |
| Name | AC Oil free vacuum pump |
| Packing | 1 pcs / carton case |
| Weight | 17.5kg |
| Dimension | 305*156*288*mm |
| Technical Specification | Voltage :AC220V 50Hz 110V 60Hz
Vacuum flow : 240L/min@-92Kpa ; (One-Grade vacuum) Power: 700W ; Noise : ≤58dB(A) ; Speed: 1440rpm / 1700rpm ; Temperature : -5ºC-40ºC With Power cord,capacitor,handles attached |
Detailed Photos
Product Advantages
Company Profile
FAQ
Q.1: What’s your factory address ? May I visit your factory ?
Our factory is located in HangZhou city, ZHangZhoug province, near to HangZhou, ZheJiang and HangZhou, about 2 hours by bus or train.Welcome to visit our factory.
Q.2: When I get my products, is there anything I should pay attention to ?
It need to clear the filter once every 2 months.
When use it, it need to handle with care and pay more attention to waterproof.
Q.3 : Can I buy the sample to test?
We are pleased to send the samples for your evaluation.And the samples shipping freight can be return back to you with next bulk order .
Q.4: Do you have test records of every pump?
We will inspect products 3 times before shipment and every pump have the test records. We will keep these test records to our quality traceability system about 3-5 years.
Test items : workmanship, air flow rate, power, vacuum pressure, current, noise, vibration , temperature and durability etc.
Q.5:How long is the life of the your pump?
“Quality is our culture”, our vacuum pump with long life (20000 hours ) and high quality ( stable air flow, import spare parts,
high workmanship etc ).
Q.6: What’s your warranty?
Our warranty is 2 years.It means that if our machine has any problems within 2 years, we will send you new 1 or free spare parts for your replacement.
Q.7: Question : How many years of your factory?
Our factory has the production experience more than 20 years.
We make main spare parts of vacum pump by ourselves (include the motor), so we can control the pumps quality very well
Q.8: Question: Can you produce products same/ similar with mine?
We have professional and experienced R & D team, so we can better serve customers to achieve high-end customization and development. We accept the ODM and OEM.
| After-sales Service: | Online Support |
|---|---|
| Warranty: | Two Years |
| Oil or Not: | Oil Free |
| Structure: | Piston Pump |
| Exhauster Method: | Piston Vacuum Pump |
| Vacuum Degree: | Vacuum |
| Samples: |
US$ 140/Pieces
1 Pieces(Min.Order) | |
|---|
| Customization: |
Available
|
|
|---|
Types of vacuum pumps
A vacuum pump is a device that draws gas molecules from a sealed volume and maintains a partial vacuum. Its job is to create a vacuum in a volume, usually one of several. There are several types of vacuum pumps, such as root pumps, diaphragm pumps, rotary piston pumps, and self-priming centrifugal pumps.
The diaphragm pump is a dry positive displacement vacuum pump
Diaphragm pumps are a versatile type of vacuum pump. They can be installed in a variety of scenarios including container emptying, positive suction, and simultaneous fluid mixing. Their performance depends on the stiffness and durability of the diaphragm, which in turn depends on the material.
They have good performance when running in dry mode. Diaphragm pumps work very similarly to the human heart, which is why they are often used to create artificial hearts. In addition, the diaphragm pump is self-priming and has high efficiency. They are also capable of handling the most viscous liquids and are used in almost all industries.
However, this type of pump has several disadvantages. One of them is that they are difficult to restart after a power outage. Another disadvantage is that they can generate a lot of heat. Fortunately, this heat is carried away by airflow. However, this heat builds up in the multistage pump. If this happens, the diaphragm or motor may be damaged. Diaphragm pumps operating in two or more stages should be fitted with solenoid valves to maintain vacuum stability.
Diaphragm pumps are a good choice for drying processes where hygiene is important. These pumps have check valves and rubber or Teflon diaphragms. Diaphragm pumps are also ideal for high viscosity applications where shear sensitivity is important.
Roots pumps are dry method centrifugal pumps
Roots pumps use a vane rotor pump with two counter-rotating vanes that move in opposite directions to move the gas. They are often the first choice for high-throughput process applications. Depending on the size and number of blades, they can withstand up to 10 Torr.
Centrifugal pumps have several advantages, including the ability to handle corrosive fluids and high temperatures. However, when choosing a pump, it is essential to choose a reputable manufacturer. These companies will be able to advise you on the best pump design for your needs and provide excellent after-sales support. Roots pumps can be used in a wide range of industrial applications including chemical, food, and biotechnology.
The Roots pump is a dry centrifugal pump whose geometry enables it to achieve high compression ratios. The screw rotors are synchronized by a set of timing gears that allow gas to pass in both directions and create a compressed state in the chamber. The pre-compressed gas is discharged through a pressure connection and cooled with water. Some pumps are also able to accept additional cooling gas, but this should be done with caution.
The size of the impeller plays an important role in determining the pump head. The impeller diameter determines how high the pump can lift the liquid. Impeller speed also affects the head. Since the head is proportional to the specific gravity of the liquid, the available suction pressure will be proportional to the density of the liquid. The density of water is about 1.2 kg/m3, and the suction pressure of the centrifugal pump is not enough to lift the water.
The rotary vane pump is a self-priming centrifugal pump
A rotary vane pump is a centrifugal pump with a circular pump head and a cycloid cam that supports the rotor. The rotor is close to the cam wall, and two side plates seal the rotor. Vanes in vane pumps are installed in these cavities, and the rotor rotates at high speed, pushing fluid in and out of the pump. The pump offers several advantages, including a reversible design and the ability to handle a wide variety of clean fluids.
Agknx Pumps manufactures a wide range of vane pumps that combine high performance, low cost, and easy maintenance. These pumps handle medium to high viscosity liquids up to 500 degrees Fahrenheit and 200,000 SSU.
The suction side of the rotary vane pump has a discharge port, and the valve prevents the backflow of the discharge air. When the maximum pressure is reached, the outlet valve closes to prevent the backflow of exhaust gas. The mechanical separation step separates the oil from the gas in the pump circuit and returns the remaining oil particles to the sump. The float valve then reintroduces these oil particles into the oil circuit of the pump. The gas produced is almost oil-free and can be blown out of a pipe or hose.
Rotary vane pumps are self-priming positive displacement pumps commonly used in hydraulic, aeration, and vacuum systems. Unlike gear pumps, rotary vane pumps can maintain high-pressure levels while using relatively low suction pressures. The pump is also very effective when pumping viscous or high-viscosity liquids. 
Rotary piston pumps are dry method positive displacement pumps
Rotary piston pumps are dry positive displacement pumps designed to deliver high-viscosity fluids. They are capable of pumping a variety of liquids and can run dry without damaging the liquid. Rotary piston pumps are available in a variety of designs. Some are single shafts, some are two shafts and four bearings.
Positive displacement pumps operate slower than centrifugal pumps. This feature makes the positive displacement pump more sensitive to wear. Piston and plunger reciprocating pumps are particularly prone to wear. For more demanding applications, progressive cavity, diaphragm or lobe pumps may be a better choice.
Positive displacement pumps are typically used to pump high-viscosity fluids. This is because the pump relies on a mechanical seal between the rotating elements and the pump casing. As a result, when fluids have low viscosity, their performance is limited. Additionally, low viscosity fluids can cause valve slippage.
These pumps have a piston/plunger arrangement using stainless steel rotors. Piston/piston pumps have two cavities on the suction side. The fluid then flows from one chamber to the other through a helical motion. This results in very low shear and pulsation rates. The pump is usually installed in a cylindrical housing.
Rotary vane pump corrosion resistance
Rotary vane vacuum pumps are designed for use in a variety of industries. They feature plasma-treated corrosion-resistant parts and anti-suck-back valves to help reduce the number of corrosive vapors entering the pump. These pumps are commonly used in freeze dryers, vacuum ovens, and degassing processes. The high flow rates they provide in their working vacuum allow them to speed up processes and reduce the time it takes to run them. Plus, they have energy-efficient motors and silent volume. <br/While rotary vane vacuum pumps are relatively corrosion resistant, they should not be used for aggressive chemicals. For these chemicals, the most suitable pump is the chemical mixing pump, which combines two types of pumps to improve corrosion resistance. If the application requires a more powerful pump, a progressive cavity pump (eg VACUU*PURE 10C) is suitable.
Oil seals used in rotary vane pumps are important to pump performance. The oil seal prevents corrosion of the aluminum parts of the rotary vane pump and prolongs the service life. Most rotary vane vacuum pumps have a standard set of components, although each component may have different oil seals.
Rotary vane vacuum pumps are the most common type of positive displacement pump. They provide quiet operation and long service life. They are also reliable and inexpensive and can be used in a variety of applications. 
Roots pumps are primarily used as a vacuum booster
Root vacuum pumps are mainly used as vacuum boosters in industrial applications. They need a thorough understanding of operating principles and proper maintenance to function properly. This course is an introduction to Roots vacuum pumps, covering topics such as pump principles, multi-stage pumps, temperature effects, gas cooling, and maintenance.
Roots pumps have many advantages, including compact and quiet operation. They do not generate particles and have a long service life. They also don’t require oil and have a small footprint. However, Roots pumps have several disadvantages, including relatively high maintenance costs and low pumping speeds near atmospheric pressure.
Root vacuum pumps are often used with rotary vane vacuum pumps. They work on the same principle, the air enters a conveying unit formed by two rolling pistons in the housing. The piston heads are separated from each other, and the air passes through the unit without being reduced until it is discharged. When the air in the next unit reaches a higher absolute pressure, it is expelled from the last unit.
Roots pumps can be classified as sheathed or sealed. Roots pumps with sealed motors are suitable for pumping toxic gases. They have less clearance between the stator and motor rotor and have a sealed tank.
editor by CX 2023-05-31
china sales Air Pump for Air Compressor Industrial Equipment High Pressure Air Compressor manufacturers
Item Description
picket scenario bundle
Our Providers
We offer 1 year warranty. During warranty period, any problem caused by air compressor quality please feedback to us as soon as possible, we will offer technical help and guidance with free spare parts for maintenance
| FAQ | |||||||||||||
| 1. Are you a manufacturing facility or a buying and selling organization? A: We are factory, and We have the proper to export any region independently two.What is the particular handle of your organization? 3. Do your organization settle for ODM & CZPT ? 4. What about the voltage of items? Can they be CZPT ized? 5.Do your company supply spare elements of the equipment? 6.What are your payment conditions? 7. What payment approaches do you accept? 8. How CZPT will you consider to prepare the merchandise? |
|||||||||||||
The suction made by regenerative blowers is utilised in a range of industrial programs. They contain a non-making contact with, quick rotating impeller, so they are dress in and routine maintenance free. There are two annular unbiased side passages together the casing on equally sides of the impeller.
china factory High Performance China Factory Micro Vacuum Pump/ Micro Air Pump/Brush DC Diaphragm Pressure Vacuum Pump/Mini Compressor Air Pump manufacturers
Merchandise Description
Packing & Shipping
Packaging Information: CZPT Carton Box ,Outside With Pallet.
Delivery Time: Less Than 10000PCS For the duration of fifteen Times.
Port: HangZhou,HangZhou,HangZhou,ZheJiang ,HangZhou.
5L Vacuum Pump
Higher adverse force, Brush DC motor
Extended life span, CZPT overall performance price ratio
The merchandise is mini DC diaphragm air pump with brush motor. It is made dependent on the good displacement pumps. It is CZPT ed by the rotation of motor. The eccentric vane drives the rubber inside of to reciprocate, forming absorbing and discharging pressure to pump air.
Application
Widely employed in healthcare equipments, Breast Pump, Massage Therapy CZPT s, Human body CZPT Cares, CZPT ctronic Instruments. Laboratory,Foodstuff and Beverage,Instruments and equipment,Inkjet ,Digital Etc.
Features
Small measurement, CZPT ful enter and output force.
Diaphragm materials: EPDM, highly resistant to acid, alkali, poor oil resistance.
Very good leakproofness.
Endurable, cost-free maintenace.
Specification
| Design | Rated Voltage | Energy | Working Recent | Air Circulation | Max Stress | Max Vacuum | Leakage | Inflation Time | Sounds | Existence Take a look at | Pipe Diameter | N.W (KG) |
| OMK-5L | DC 6V | 8W | < 600mA | ≥5LPM | ≥600mmHg | ≥300mmHg | ≤15mmHg/min | ≤10S(500CC) | < 45dB | 500H | Φ 5.5/Φ4mm | .067 |
| DC 12V | 8W | < 300mA | ≥5LPM | ≥600mmHg | ≥300mmHg | ≤15mmHg/min | ≤10S(500CC) | < 45dB | 500H | Φ 5.5/Φ4mm | .067 | |
| DC 24V | 8W | < 150mA | ≥5LPM | ≥600mmHg | ≥300mmHg | ≤15mmHg/min | ≤10S(500CC) | < 45dB | 500H | Φ 5.5/Φ4mm | .067 |
Dimension (mm)
EP types and manufactures a vast selection of industrial vacuum pump systems. From ” to 29.ninety” Hg, from main pump to increase, from constructive displacement to dynamic, our vacuum pumps cover a vast range of working pressures, rules and technologies, including oil-cost-free/dry and oil-lubricated rotary vane, oil-free / Dry rotary screw, claw vacuum pumps, radial vacuum pumps and regenerative blowers configured for vacuum applications.
china supplier High Quality Double Cylinder 2X750W Compressor Machine Complete Air-Compressor Parts Best Price Oil-Free Vacuum Air Compressor Pump manufacturers
Solution Description
Merchandise Description
Solution Parameters
| Parameters | ||
| Design | FB1500 D0-10C40 | FB1500 D0-10C40(Substantial Vacuum) |
| Type | Oil Free Vacuum CZPT | Oil Cost-free Vacuum CZPT |
| Rated InputVoltage/Frequency(V/Hz) | AC220V/50HZ | AC220V/50HZ |
| Input Power(KW/HP) | 750W | 750W |
| Pace(RPM) | 1450RPM | 1450 RPM |
| Pumping CZPT (L/min) | 260L/min(9.2CFM) | 130L/min(4.6CFM) |
| Wire Materials | Copper | Copper |
| Tank | 40L(8.8Gal) | 40L(8.8Gal) |
| Sound Level | 60dB | 60dB |
| Web.Excess weight(KG) | 37KG | 37KG |
| Machine Dimension | 690*320*720mm | 690*320*720mm |
| Packaging Proportions | 710*340*740mm | 710*340*740mm |
Certifications
Firm Profile
ZHangZhoug CZPT CZPT CZPT Co.,Ltd is a huge-scale enterprise team which is specializing in R&D
and producing CZPT types of CZPT s, vacuum pump, welding consumable, welding and reducing ma-
chines, electric powered appliances, industrial investment decision,and so on.
It was proven in 1998. As the top modem enterprise in the CZPT and vacuum pump sector field in
China, obtaining a staffing of much more than 500 personnel, and within 8% of Research Specialist Workers, twelve% of Administration
Positions,and more than three hundred things. The production capacity can get there 50000. sets of CZPT varieties of CZPT s,
vacuum pump, welding and cutting devices, which is included in 23 series merchandise and more than 120 merchandise specifi-
cations.
Since its establishment, we often uphold the purpose of faithful & specialist, follow & innovations has taken the
guide in introduction of ERP, which makes a lot progress of administration innovation and perfection. In added, it has
handed ISO9001, ISO14001, CE, EEC, RoHS, and CCC certificates. The products have been lined all round of the
planet and acquire recognition from international CZPT ers!
The sequence of items are widely utilized in the fields of Naval architecture and CZPT CZPT submitted, CZPT motive resources
industry, Railway tools producing, CZPT business, Aerospace sector, Meals Market, CZPT and Dental
field, And so forth.The company is devoted to furthering internationally licensed and processional CZPT , vacuum
pump, welding device items for the worldwide market place!
Packaging & CZPT
Software
Our Rewards
Hot Product
Rotary Vane Vacuum Pumps Sturdy rotary vane pumps are also suitable for large differential pressures in vacuum apps. Eccentrically mounted rotors with grooves rotate in cylindrical housings in which specifically mounted sliding vanes move and individual functioning chambers
china best High Quality 0.37kw to 7kw Xd Series Lab Use Single Stage Oil Sealed Rotary Vane suction Micro Vacuum Pump Air Pump with Compressor Motor manufacturers
Product Description
1. XD sort rotary vane vacuum pumps are solitary-phase oil-sealed rotary vane vacuum pumps, which are the basic equipment for acquiring vacuum. The doing work principle is proven in Figure 1
2. The suction port of XD rotary vane vacuum pump is geared up with a coarse filter of wire mesh. It can avert reliable foreign dust particles from currently being sucked into the pump cavity. An exhaust changeover with large-effectiveness oil-gasoline separation influence is installed in the oil separator. When the pump is stopped, the suction valve constructed into the suction port isolates the pump from the pumped method and prevents the pump oil from returning to the pumped program. The pump is air cooled. All pumps are pushed by direct-linked electric motors by means of CZPT s.
Solution Pictures:
Structure Description:
1. Oil separator 2. Exhaust filter 3. Oil return valve element 4. Oil filter 5. Vacuum pump oil 6. Shock-absorbing pad 7. Suction port 8. Suction filter 9. Verify valve assembly 10 .Pump body 11. Rotary vane twelve. Rotor 13. CZPT
Performance Curve:
Solution functionality and parameters:
| Design | XD-571 | XD-016 | XD-571 | XD-571 | XD-040 | XD-063 | XD-one hundred | XD-a hundred and sixty | XD-250 |
| displacement capability(m3/h) | 10 | 16 | twenty | 25 | forty | sixty three | one hundred | one hundred sixty | 250 |
| Limited pressure(Pa) | 2×102 | ||||||||
| Power(kw) | .37 | .37 | .75 | .seventy five | 1.1 | one.five | 3 | 4 | seven.5 |
| pump pace(r.p.m) | 1440 | 1440 | 2800 | 2800 | 1440 | 1440 | 1440 | 1440 | 1440 |
| Oil loading(L) | .five | .5 | .5 | one | one.5 | 2 | four | 9 | 9 |
| Air inlet measurement | G½ | G½ | G½ | G1¼ | G1¼ | G1¼ | G1¼ | G2 | G2½ |
| pump bodyweight(kg) | sixteen | eighteen | 19 | 19 | 60 | 22 | a hundred and fifteen | 145 | two hundred |
| Voltage(V) | 380/220 | 380/220 | 380/220 | 380/220 | 380/220 | 380 | 380 | 380 | 380 |
Product Software:
one. The XD rotary vane vacuum pump is ideal for vacuuming the closed system. This kind of as vacuum packaging, vacuum forming, vacuum suction.
2. Inlet stress selection: 100Pa~100000Pa, beyond this assortment, oil mist will be generated at the exhaust port of the vacuum pump. The functioning ambient temperature and the suction fuel temperature of the XD rotary vane vacuum pump should be between 5 °C and forty °C.
3. The XD rotary vane vacuum pump can’t pump out water or other liquids. Explosive, flammable, higher oxygen content material and corrosive gases can’t be taken off.
four. The motors normally equipped are not explosion-proof. If explosion-proof or other special needs are required, the motors must meet the appropriate specifications.
Solution Attributes:
All are solitary-phase oil-sealed rotary vane vacuum pumps, which are the basic products for acquiring vacuum.
A coarse filter with wire mesh is mounted at the suction port. It can avoid solid foreign dust particles from becoming sucked into the pump cavity. An exhaust changeover with higher-effectiveness oil-gas separation influence is mounted in the oil separator. When the pump is stopped, the suction valve built into the suction port isolates the pump from the pumped method and stops the pump oil from returning to the pumped program. The pump is air cooled. All pumps are pushed by immediate-linked electric motors by way of CZPT s.
Company Profile:
EP styles and manufactures a broad variety of industrial vacuum pump technologies. From ” to 29.ninety” Hg, from major pump to enhance, from optimistic displacement to dynamic, our vacuum pumps cover a broad assortment of working pressures, principles and technologies, such as oil-free/dry and oil-lubricated rotary vane, oil-totally free / Dry rotary screw, claw vacuum pumps, radial vacuum pumps and regenerative blowers configured for vacuum applications.
china Custom High Performance China Micro Vacuum Pump/ Micro Air Pump/Brush DC Diaphragm Pressure Vacuum Pump/Mini Compressor Air Pump Factory manufacturers
Merchandise Description
Why select CZPT FLO Manufacturing unit ?
♦ CZPT FLO is the only double certified enterprise by German TUV IATF16949 & ISO9001 in the pump industry
♦ 16 years of industry experience.Unbiased investigation and development, national substantial-tech enterprise, a number of domestic and foreign invention patents
♦ Annual production capacity of 3,008,000 pieces
♦ 4 laboratories that meeting the CNAS certification standard
♦ 80% of the products are exported to high-end market in Europe and America
Remarks:
– We are Large-finish Brushless DC pumps CZPT r. Can supply CZPT ized solutions
– If you are fascinated in CZPT merchandise, pls really feel free of charge to contact us
Client Critiques
You want it, We all have !
Micro Vacuum Pump/ Micro Air Pump/Brush DC Diaphragm Strain Vacuum Pump/Compressor Air Pump
Remarks:
– We are large-end Brushless DC pumps producer. Can offer CZPT ized providers
– If you are intrigued in CZPT items, pls really feel totally free to contact us
Our Micro Diaphragm Pumps are CZPT with a decision of 4 different generate motors.
A- CZPT ium obligation brush DC motor
life span 3,000hours,for a longer time endurance lifetime than other regular DC membrane pump
B- Economical brush DC motor
lifetime:1,500hours
C- Coreless Brushless DC CZPT
A brushless electronically commutated dc motor (electronics built-in in motor), the motor operates vibration and spark free of charge, virtually silently, is extremely dynamic and extremely sturdy, ideal daily life-time 15000 hrs
D- Coreless Brushless DC motor with outer controller
With all rewards of coreless brushless DC motor, ideal lifestyle-time 15000 several hours, and outer controller can realize a lot more handle functions of PWM or -5V pace adjustment, brake, ~ immediate starting up operate
H- Brushless DC CZPT
Prolonged lifetime 10000hour
Merchandise Specification
| Model | TM30A-A | TM30A-B | TM30A-C | TM30A-D |
| Motor kind |
A–substantial efficiency Brush motor |
B–Brush motor | C–Brushless motor | D–Brushless motor |
| Pump Assembly Rated Daily life | 3000hour | 1000hour | 15000hour | 15000hour |
| Gas movement | 6L/min | 4.5L/ | four.five | four |
| Rated Voltage | 12V | six/12/24v | six/12/24v | 6/12/24v |
| No-load Current | .24 | 0.4/.24/.fifteen | ||
| Media | Most gas | |||
| Max Pressure | 120kpa | |||
| Max Vacuum | -70kpa | |||
| Ambient Temperature | 41 to 158 F(5 to 70C) | |||
| Pump size | seventy five.5*30.4*fifty four.6mm | seventy five*31.2*57.5mm | seventy nine*31.2*fifty seven.5mm | 79*31.2*57.5mm |
| Excess weight | 200g | 150g | 250g | 250g |
| Inlet&Outlet | OD 4.8mm/ID 2.6mm,hose recommendation:ID 4.0mm | |||
| Components |
pump head Nylon, membrane EPDM , valve EPDM |
pump head Nylon, membrane EPDM / PTFE, valve EPDM / FPM |
pump head Nylon, membrane EPDM / PTFE, valve EPDM / FPM |
pump head Nylon, membrane EPDM / PTFE, valve EPDM / FPM |
| Wetted substance possibilities |
one.Optional membrane resources: 2.Optional valve supplies: |
|||
Get more Specialized knowledge, You should Send out information
TOPSFLO Diaphragm series gas pumps are the best mix of sort and function. The use of a specific diaphragm permits the pump to transfer the two air and liquid effectively. The compact lightweight unit offers the best possible sizing for analytical tools.
ADVANTAGES
♦ High pneumatic efficiency
♦ Compact measurement/substantial CZPT density
♦ Uncontaminated circulation – no contamination of the media owing to oil-totally free procedure
♦ Maintenance-totally free
♦ Long item life
♦ Low audio level
♦ Low CZPT consumption
♦ Can operate in any orientation
♦ Suction
The flexibility of CZPT FLO pumps allows a wide field of applications to be lined. Above a lot of several years CZPT pumps have proved them selves in the subsequent regions:
one.Industrial stress and vacuum programs
two.Moveable Analytical CZPT s
3.Health care Gear
4.Air High quality Sampling Monitors
five.Respiration Displays
six.Fuel or Odor Leak Detectors
Performance Curve
Get more Technological info, Make sure you Ship message
The EP booster vacuum pump or Roots vacuum pump is a dry optimistic displacement pump. They use the Roots doing work basic principle, comparable to the working principle of rotary vane pumps. These pumps are the ideal resolution when substantial pump speeds are necessary.
2.2kw 300bar 4500psi Mini Portable Piston Electric Gasoline Diesel Air Cooling High Pressure Pcp Paintball Scuba Diving Fire Breathing Air Compressor
two.2kw 300bar 4500psi Mini Portable Piston CZPTtric/Gasoline/Diesel Air CZPT Substantial Stress PCP Paintball/Scuba Diving/Hearth Respiratory Air Pump Air CZPT
Code:SCU100D
Movement charge:100 L/min 3.5cfm
Filling time:20 minutes for 6L tank
Working stress:300bar /4500psi
Motor energy:diesel
CZPTn:belt
Lubricate:splash
CZPTter:ON/OFF button
Condensate drain:guide
Filling hose connect :1
Proportions(H-W-D):440-750-360 mm
Bodyweight:46 kg
Sounds level:80 db(A)
3.5HP AC Rotary Screw Mini Piston Industrial High Pressure Hermetic Air Pump Compressor Motor Head
Oilless Air CZPT Head
Motor thickness:65mm
Head Dimensions: 310x250mm
Cylinder Diameter: 47mm
Mini Automotive Screw AC Portable Parts High Pressure Piston Air Pump Compressors Compressor
|
Energy: |
1800w |
Voltage: |
220V |
|
Exhaust Stress: |
.8Mpa |
Current: |
seven.5A |
|
Frequency: |
50HZ |
Revolving Velocity: |
2850rpm |
|
Volume of Gas Storage Tank: |
30L |
Cylinder: |
47mm |