Centrifugal Horizontal CZPT Chrome alloy AH Slurry Pump
Introduction:
1. HS series slurry pump is created for the steady pumping of high abrasive, high density slurries with nominal servicing requirements. The putting on components are produced of ultra chrome or and rubber. It will sustain large efficiency in excess of the use lifestyle of its elements.
two. The metallic soaked areas and rubber kinds can be interchangeable for handling diverse liquids or slurries.
three. HS slurry pumps are accessible in dimensions ranging from 1 inch to 18 inch discharge and characteristic large efficiency performance able of movement prices from 10.eight to 5400 m³/h and heads up to a hundred twenty five meters for higher head types.
Attributes:
1. Cylindrical composition of bearing assembly: practical to modify the area amongst impeller and front liner
and can beremoved completely
2. Interchangeable anti-abrasive moist elements made of higher-chrome alloys
3. Casing halves of ductile iron with exterior reinforcing ribs supply large functioning pressure abilities
and an further evaluate of basic safety.
4. The discharge branch can be oriented to any eight positions at the interval of forty five levels
5. Different push kinds: DC(immediate relationship), V-belt push, equipment box reducer, hydraulic couplings, VFD,
SCR handle, etc
six. The shaft seal utilizes the packing seal, expeller seal and mechanical seal
Standard Software:
• CZPT processing | • CZPT | • Coal Washery | • Cyclone feeds |
• Bentonite | • CZPT slurry | • Tailing | • Mill grinding |
• Ash handing | • Tunnel | • Squander sludge | • Coarse sand |
• Lime mud | • Phosphoric acid | • Dredging | • CZPT |
• Alumina CZPT | • Energy Plant | • Potash Fertilizer Plant | • Other industries |
• Iron ore sand | • Copper Concentration | • Gold mine | •Molybdenum |
Model | Max Energy (Kw) |
Inlet & Outlet size (inch) | Material for Use Areas | Flow Rate (Q) | Head (H) meter |
Speed (RPM) |
Impeller Dia. (mm) |
|
m³/hr | l/s | |||||||
25HS-B | fifteen | 1.5/1 | M | twelve.6~28.8 | 3.5~8 | six~sixty eight | 1200~3800 | 152 |
R | ten.8~25.two | three~7 | 7~52 | 1400~3400 | 152 | |||
40HS-B | fifteen | two/1.five | M | 32.four~seventy two | nine~twenty | six~fifty eight | 1200~3200 | 184 |
R | twenty five.2~54 | 7~fifteen | five.five~41 | 1000~2600 | 178 | |||
50HS-C | 30 | three/two | M | 39.6~86.four | eleven~24 | 12~sixty four | 1300~2700 | 214 |
R | 36~75.6 | ten~21 | thirteen~forty six | 1300~2300 | 213 | |||
75HS-C | thirty | four/three | M | 86.4~198 | 24~fifty five | 9~fifty two | 1000~2200 | 245 |
R | seventy nine.two~a hundred and eighty | 22~fifty | five~34.5 | 800~1800 | 245 | |||
100HS-D | sixty | 6/4 | M | 162~360 | 40~100 | twelve~56 | 800~1550 | 365 |
R | 144~324 | forty~ninety | twelve~45 | 800~1350 | 365 | |||
150HS-E | a hundred and twenty | 8/6 | M | 360~828 | 100~230 | 10~sixty one | 500~1140 | 510 |
R | 324~720 | ninety~200 | 7~forty nine | 400~1000 | 510 | |||
200MS-E | 120 | 10/eight | M | 666~1440 | 185~four hundred | 14~sixty | 600~1100 | 549 |
200HS-ST | 560 | ten/8 | M | 612~1368 | one hundred seventy~380 | 11~sixty one | 400~850 | 686 |
R | 540~1188 | 150~330 | 12~fifty | 400~750 | 686 | |||
250HS-ST | 560 | twelve/10 | M | 936~1980 | 260~550 | 7~68 | three hundred~800 | 762 |
R | 720~1620 | two hundred~450 | 7~forty five | three hundred~650 | 762 | |||
300HS-TU | 560 | fourteen/twelve | M | 1260~2772 | 350~770 | 13~sixty three | 300~600 | 965 |
R | 1152~2520 | 320~seven hundred | thirteen~forty four | three hundred~500 | 965 | |||
350HS-TU | 1200 | sixteen/fourteen | M | 1368~3060 | 380~850 | eleven~63 | 250~550 | 1067 |
450HS-TU | 1200 | twenty/18 | M | 2520~5400 | seven hundred~1500 | 13~57 | two hundred~four hundred | 1370 |
25HHS-C | thirty | 1.five/1 | M | sixteen.2~34.two | four.5~nine.five | 25~92 | 1400~2200 | 330 |
50HHS-D | 60 | three/2 | M | 68.four~136.eight | 19~38 | 25~87 | 850~1400 | 457 |
75HHS-E | 120 | four/three | M | 126~252 | 35~70 | 12~ninety seven | 600~1400 | 508 |
100HHS-E | 120 | 6/four | M | 324~720 | ninety~200 | 30~118 | 600~a thousand | 711 |
150HHS-S | 560 | 8/six | M | 468-1008 | a hundred thirty~280 | twenty~ninety four | five hundred~1000 | 711 |
For the materials of sporting areas,
“M” = metallic, extremely chromium alloy “R” = anti-abrasive rubber
Contact
Welcome to speak to us any time for particulars.
Your inquiry will get our prompt focus and reaction !