F Collection Mud Pump for Drilling Rig
Characteristics
F series mud pumps are characterized by compact structure,small volume,good operation performance.
F series mud pumps have a longer stroke and can be operated at a lower stroke,thusimproved the water supplying performance effectively,extended the lifetime of expendable parts at the fluid end greatly and achieved the best buffer effect in suction line.
This series mud pumps are widely used in the oilfield and other industrial mining enterprises for well drilling, workover and other operations.F-800 pump suits to 20-32 drilling rig.
The mud pumps are strictly manufactured according to API Spec 7k “the CZPT Specification of Well Drilling and Workover”, and are tested accordingly when leave factory.
CZPT Parameters
Design | F-500 | F-800 | F-one thousand | F-1300 | |
Kind | Triplex Single-Performing | ||||
Rated Power (kW/HP) | 373/500 | 597/800 | 746/a thousand | 969/1300 | |
Strokes per minute | one hundred sixty five | 150 | 140 | a hundred and twenty | |
Stroke Length (mm/in) | 191/7 1/two” | 229/9″ | 254/10″ | 305/12″ | |
Max. Liner Dia (mm/in) | a hundred and seventy/6 3/4″ | a hundred and seventy/6 3/four” | 170/6 3/4″ | 180/7″ | |
Gear Type | Herringbone Gear | ||||
Valve Pot | API-5# | API-six# | API-six# | API-seven# | |
Gear Ratio | 4.286:one | 4.185:one | four.207:one | four.206:1 | |
Dia of Suction Inlet (mm/in) | 203/eight” | 254/ten” | 305/twelve” | 305/twelve” | |
Dia of Discharge Outlet | four”flange 5000psi |
5 1/8″flange 5000psi | 5 1/eight”flange 5000psi | 5 1/8″flange 5000psi | |
Dia. of Pinion Shaft (mm/in) | 139.7(5 1/two) | 177.eight(7) | 196.nine(7 3/four) | 215.nine(8 1/two) | |
Max Pressure Mpa/psi | 27.two/3945 | 34.5/5000 | 34.5/5000 | 34.5/5000 | |
Overall Dimensions (mm/in) | 3658*2709*2231 |
3963*3146*2321 |
3963*3146*2321 |
4615*3276*2688 |
|
Weight kg(lb) | 9770(21540) | 14500(31970) | 18600(41000) | 24572(54170) |