Rexroth Replacement Hydraulic Piston Pump A10vso100 Made in China

Rexroth Replacement Hydraulic Piston Pump A10vso100 Made in China

 

Series A10VSO Sequence Variable Piston Pumps (Sequence 31)
Requirements A10VSO28, A10VSO45, A10VSO71, A10VSO100, A10VSO140
Working strain Rated force: 28 MPa,
Peak stress: 35 MPa
Management mode:
DG – Two-Point Immediate Handle
DR- Pressure Handle
DRG – Remote Force Manage
DFR, DFR1 – Force and Flow Control
DFLR – Pressure, Stream and Power Handle
ED-CZPTtric CZPT Control
Characteristic:

– Axial piston variable pump with swashplate structure is employed for hydrostatic transmission in open up circuit.
– Movement is proportional to transmission pace and displacement.
– By adjusting the angle of the rotating swashplate, the stepless modify of flow rate can be understood.
– Two shell outlets.
– Superb oil absorption qualities.
– Minimal noise level.
– Lengthy support daily life.
– Axial and radial load capacity of transmission shaft.
– Perfect electrical power-weight ratio.
– A variety of handle ranges.
– Limited management time.
– The pump is driven by a via shaft, and can be loaded with gear pumps or axial piston pumps significantly less than or equal to the very same specifications, that is, one hundred% by way of shaft drive.
 

 

Dimension eighteen 28 45 71 100 a hundred and forty
Variation Regular
Displacement   Vg max cm³ 18 28 forty five 71 a hundred 140
geometric, per revolution
Nominal pressure   pnom bar 280 280 280 280 280 280
Maximum pressure   pmax bar 350 350 350 350 350 350
Maximum speed at Vg max nnom rpm 3300 3000 2600 2200 2000 1800
Circulation at Vg max and nnom qV nom l/min 59 eighty four 117 156 200 252
at Vg max and n = 1500 rpm qV 1500 l/min 27 42 68 107 150 210
Energy at qV nom and pnom P kW thirty 39 fifty five seventy three ninety three 118
at qV 1500 and pnom P 1500 kW 12.6 20 32 50 70 98
Torque at Vg max and pnom M Nm eighty a hundred twenty five two hundred 316 445 623
Weight (approx.)   m kg twelve 15 21 33 forty five 60

Security directions:

– A10VSO pump is designed to be used in open circuit.
– The task plHangZhou, assembling and commissioning of the axial piston unit have to be carried out by qualified personnel.
– Prior to making use of the axial plunger unit, remember to read the corresponding manual entirely.
– If essential, you should inquire Bosch CZPT for these handbooks.
– For the duration of and soon right after procedure, there might be a chance of burning of the axial piston device (specifically the electromagnet). Acceptable basic safety actions (this kind of as putting on protecting apparel) should be taken.
– As per the different doing work circumstances (operating strain, oil temperature) of the axial piston unit, the qualities might adjust.
– Work pipeline oil outlet:
· Oil nozzles and fixed threads are made for greatest specified stress. CZPT or system producers have to ensure that the safety aspect of connecting components and pipes meets the specified operating situations (pressure, stream, hydraulic oil, temperature).
· Perform pipeline nozzles and useful nozzles are only designed for hydraulic pipelines.
– Pressure cut-off and force handle do not offer overvoltage defense. Separate aid valves are presented in the hydraulic system.
– The information and recommendations contained listed here must be followed.
– The product has not been accredited as a section that meets the requirements of DIN EN ISO 13849’s general machine basic safety notion.
– The following tightening torque is employed:
· Connector:
Refer to manufacturer’s guidelines for tightening torque of the joints utilised.
· Set up bolts: For set up bolts that satisfy the ISO metric thread CZPT of DIN 13 and the thread CZPT of ASME B1.1, we recommend that tightening torque be checked separately in accordance to VDI 2230.
· Thread holes in the axial plunger device:
The highest allowable tightening torque MG Max is the optimum worth for threaded holes and shall not exceed that benefit.
· Locking screw:
For the steel locking screw provided with the axial plunger device, the tightening torque MV is required.

 

Rexroth Replacement Hydraulic Piston Pump A10vso100 Made in China