Oil Vapor Recovery Vacuum Pump

Oil Vapor Recovery Vacuum Pump

Vapor oil and fuel restoration vacuum pump Application
Vapor oil and gas restoration vacuum pump is a fairly consummate pump for oil-gas recovery, operating beneath the ambient temperature at -40~60°C. It can be utilized separately or as a part of oil-gasoline restoration system in gas stations, which is primarily employed for oil-gasoline recovery, to lessen pollution and help save vitality.
With the developing prerequisite on getting benefit of environmental pollution and energy effectively, this Vapor oil and gas recovery vacuum pump will be utilized to this subject commonly.

Structural Attribute

Attribute of NP80 sequence oil-fuel restoration vacuum pump: a shaft dived by motor is fastened on the pump human body, and its one particular end in the pump body is fixedly related a crank which is jointed to a link rod a piston in liner with reciprocating motion is mounted on the leading of the connection rod, and the liner is mounted in the pump body a valve seat assay above the piston has inlet valve and outlet valve which are examine valves. Apart from, the inlet cavity and outlet cavity on the pump entire body are related with the inlet valve and outlet valve respectively by way of a pipeline, the inlet cavity is related with the coupling of an air eliminator, and one particular conclude of the coupling is connected with the hose through the hose coupling the hose with internal and exterior casing is related with nozzle.

 

Construction diagram:

Be aware:  There are 6 electrical wires and 5 colours in WDVP-one hundred

 

one)      Blue ,white ,brown  connect  380 Voltage power.

two)      There are two black electrical wires join 220 Voltage energy.  (1 link 220 voltage electricity, an additional hook up Zero)

3)      The yellow 1 connects Serra.

4)      The rest (blue, white, brown) needn’t hook up.

5)      Only two blacks handle the function.

 

Specification

 

l Rotary vane vacuum pump

l Pump with motor, no have an effect on the fuel dispenser normal procedure

l Compact measurement, self-lubricating Overall performance

 

CZPT Specification

 Model

Solitary PUMP Head

Double Pump Head

 Max. Circulation Rate

sixty five L/Min

one hundred twenty L/Min

 Working temperature

-twenty five~+fifty °C

 Max.Vacuum

.07MPa

 Motor Pace

2800RPM

 Motor Electricity

370W

 Power CZPT

380V/50Hz or 220V/50Hz

 Noise

≤70dB

 Connection

1/four”

3/8″

Features

 

Straightforward installation and routine maintenance: take away the 4 screws to remove the pump head for effortless installation and maintenance High vacuum degree assures clearing of flooded vapor hoses. Available for Self-contained Suction Pump Dispenser and submersible Pump Dispenser. Self-contained & single period two power provide, protected and efficient. Handles twelve fueling positions with 6 nozzles in simultaneous total movement procedure. Low sound, sluggish temperature rise.

 

one) Powerful applicability: a little and sturdy composition, the pump head can be installed at a number of angles, offering a lot more ease for the modification of the tanker b applies to ethanol gasoline, methanol gasoline.

two) Lower noise design and style: noise does not exceed sixty two decibels.

3) Support lifestyle: After stringent existence and protection take a look at, the service daily life is ≥60000 hours.

four) CZPT security steps: The fire escape valve is equipped with inlet and outlet ports.

 

Bundle Knowledge

   Each Vacuum pump fastened by foaming,then in a carton.

 

Product

Size 1.026

N.W(kg)

G.W(kg)

Voltage

Solitary/Double

380V

Single

365*275*245

twelve.32

13.05

 

Double

490*275*245

14.22

14.ninety five

220V

One

430*275*245

fourteen.32

fifteen.05

 

Double

525*275*245

sixteen.22

sixteen.95

 

Oil Vapor Recovery Vacuum Pump